1// © 2016 and later: Unicode, Inc. and others.
2// License & terms of use: http://www.unicode.org/copyright.html
3
4// edits.h
5// created: 2016dec30 Markus W. Scherer
6
7#ifndef __EDITS_H__
8#define __EDITS_H__
9
10#include "unicode/utypes.h"
11
12#if U_SHOW_CPLUSPLUS_API
13
14#include "unicode/uobject.h"
15
16/**
17 * \file
18 * \brief C++ API: C++ class Edits for low-level string transformations on styled text.
19 */
20
21U_NAMESPACE_BEGIN
22
23class UnicodeString;
24
25/**
26 * Records lengths of string edits but not replacement text. Supports replacements, insertions, deletions
27 * in linear progression. Does not support moving/reordering of text.
28 *
29 * There are two types of edits: <em>change edits</em> and <em>no-change edits</em>. Add edits to
30 * instances of this class using {@link #addReplace(int32_t, int32_t)} (for change edits) and
31 * {@link #addUnchanged(int32_t)} (for no-change edits). Change edits are retained with full granularity,
32 * whereas adjacent no-change edits are always merged together. In no-change edits, there is a one-to-one
33 * mapping between code points in the source and destination strings.
34 *
35 * After all edits have been added, instances of this class should be considered immutable, and an
36 * {@link Edits::Iterator} can be used for queries.
37 *
38 * There are four flavors of Edits::Iterator:
39 *
40 * <ul>
41 * <li>{@link #getFineIterator()} retains full granularity of change edits.
42 * <li>{@link #getFineChangesIterator()} retains full granularity of change edits, and when calling
43 * next() on the iterator, skips over no-change edits (unchanged regions).
44 * <li>{@link #getCoarseIterator()} treats adjacent change edits as a single edit. (Adjacent no-change
45 * edits are automatically merged during the construction phase.)
46 * <li>{@link #getCoarseChangesIterator()} treats adjacent change edits as a single edit, and when
47 * calling next() on the iterator, skips over no-change edits (unchanged regions).
48 * </ul>
49 *
50 * For example, consider the string "abcßDeF", which case-folds to "abcssdef". This string has the
51 * following fine edits:
52 * <ul>
53 * <li>abc ⇨ abc (no-change)
54 * <li>ß ⇨ ss (change)
55 * <li>D ⇨ d (change)
56 * <li>e ⇨ e (no-change)
57 * <li>F ⇨ f (change)
58 * </ul>
59 * and the following coarse edits (note how adjacent change edits get merged together):
60 * <ul>
61 * <li>abc ⇨ abc (no-change)
62 * <li>ßD ⇨ ssd (change)
63 * <li>e ⇨ e (no-change)
64 * <li>F ⇨ f (change)
65 * </ul>
66 *
67 * The "fine changes" and "coarse changes" iterators will step through only the change edits when their
68 * `Edits::Iterator::next()` methods are called. They are identical to the non-change iterators when
69 * their `Edits::Iterator::findSourceIndex()` or `Edits::Iterator::findDestinationIndex()`
70 * methods are used to walk through the string.
71 *
72 * For examples of how to use this class, see the test `TestCaseMapEditsIteratorDocs` in
73 * UCharacterCaseTest.java.
74 *
75 * An Edits object tracks a separate UErrorCode, but ICU string transformation functions
76 * (e.g., case mapping functions) merge any such errors into their API's UErrorCode.
77 *
78 * @stable ICU 59
79 */
80class U_COMMON_API Edits U_FINAL : public UMemory {
81public:
82 /**
83 * Constructs an empty object.
84 * @stable ICU 59
85 */
86 Edits() :
87 array(stackArray), capacity(STACK_CAPACITY), length(0), delta(0), numChanges(0),
88 errorCode_(U_ZERO_ERROR) {}
89 /**
90 * Copy constructor.
91 * @param other source edits
92 * @stable ICU 60
93 */
94 Edits(const Edits &other) :
95 array(stackArray), capacity(STACK_CAPACITY), length(other.length),
96 delta(other.delta), numChanges(other.numChanges),
97 errorCode_(other.errorCode_) {
98 copyArray(other);
99 }
100 /**
101 * Move constructor, might leave src empty.
102 * This object will have the same contents that the source object had.
103 * @param src source edits
104 * @stable ICU 60
105 */
106 Edits(Edits &&src) U_NOEXCEPT :
107 array(stackArray), capacity(STACK_CAPACITY), length(src.length),
108 delta(src.delta), numChanges(src.numChanges),
109 errorCode_(src.errorCode_) {
110 moveArray(src);
111 }
112
113 /**
114 * Destructor.
115 * @stable ICU 59
116 */
117 ~Edits();
118
119 /**
120 * Assignment operator.
121 * @param other source edits
122 * @return *this
123 * @stable ICU 60
124 */
125 Edits &operator=(const Edits &other);
126
127 /**
128 * Move assignment operator, might leave src empty.
129 * This object will have the same contents that the source object had.
130 * The behavior is undefined if *this and src are the same object.
131 * @param src source edits
132 * @return *this
133 * @stable ICU 60
134 */
135 Edits &operator=(Edits &&src) U_NOEXCEPT;
136
137 /**
138 * Resets the data but may not release memory.
139 * @stable ICU 59
140 */
141 void reset() U_NOEXCEPT;
142
143 /**
144 * Adds a no-change edit: a record for an unchanged segment of text.
145 * Normally called from inside ICU string transformation functions, not user code.
146 * @stable ICU 59
147 */
148 void addUnchanged(int32_t unchangedLength);
149 /**
150 * Adds a change edit: a record for a text replacement/insertion/deletion.
151 * Normally called from inside ICU string transformation functions, not user code.
152 * @stable ICU 59
153 */
154 void addReplace(int32_t oldLength, int32_t newLength);
155 /**
156 * Sets the UErrorCode if an error occurred while recording edits.
157 * Preserves older error codes in the outErrorCode.
158 * Normally called from inside ICU string transformation functions, not user code.
159 * @param outErrorCode Set to an error code if it does not contain one already
160 * and an error occurred while recording edits.
161 * Otherwise unchanged.
162 * @return TRUE if U_FAILURE(outErrorCode)
163 * @stable ICU 59
164 */
165 UBool copyErrorTo(UErrorCode &outErrorCode) const;
166
167 /**
168 * How much longer is the new text compared with the old text?
169 * @return new length minus old length
170 * @stable ICU 59
171 */
172 int32_t lengthDelta() const { return delta; }
173 /**
174 * @return TRUE if there are any change edits
175 * @stable ICU 59
176 */
177 UBool hasChanges() const { return numChanges != 0; }
178
179 /**
180 * @return the number of change edits
181 * @stable ICU 60
182 */
183 int32_t numberOfChanges() const { return numChanges; }
184
185 /**
186 * Access to the list of edits.
187 *
188 * At any moment in time, an instance of this class points to a single edit: a "window" into a span
189 * of the source string and the corresponding span of the destination string. The source string span
190 * starts at {@link #sourceIndex()} and runs for {@link #oldLength()} chars; the destination string
191 * span starts at {@link #destinationIndex()} and runs for {@link #newLength()} chars.
192 *
193 * The iterator can be moved between edits using the `next()`, `findSourceIndex(int32_t, UErrorCode &)`,
194 * and `findDestinationIndex(int32_t, UErrorCode &)` methods.
195 * Calling any of these methods mutates the iterator to make it point to the corresponding edit.
196 *
197 * For more information, see the documentation for {@link Edits}.
198 *
199 * @see getCoarseIterator
200 * @see getFineIterator
201 * @stable ICU 59
202 */
203 struct U_COMMON_API Iterator U_FINAL : public UMemory {
204 /**
205 * Default constructor, empty iterator.
206 * @stable ICU 60
207 */
208 Iterator() :
209 array(nullptr), index(0), length(0),
210 remaining(0), onlyChanges_(FALSE), coarse(FALSE),
211 dir(0), changed(FALSE), oldLength_(0), newLength_(0),
212 srcIndex(0), replIndex(0), destIndex(0) {}
213 /**
214 * Copy constructor.
215 * @stable ICU 59
216 */
217 Iterator(const Iterator &other) = default;
218 /**
219 * Assignment operator.
220 * @stable ICU 59
221 */
222 Iterator &operator=(const Iterator &other) = default;
223
224 /**
225 * Advances the iterator to the next edit.
226 * @param errorCode ICU error code. Its input value must pass the U_SUCCESS() test,
227 * or else the function returns immediately. Check for U_FAILURE()
228 * on output or use with function chaining. (See User Guide for details.)
229 * @return TRUE if there is another edit
230 * @stable ICU 59
231 */
232 UBool next(UErrorCode &errorCode) { return next(onlyChanges_, errorCode); }
233
234 /**
235 * Moves the iterator to the edit that contains the source index.
236 * The source index may be found in a no-change edit
237 * even if normal iteration would skip no-change edits.
238 * Normal iteration can continue from a found edit.
239 *
240 * The iterator state before this search logically does not matter.
241 * (It may affect the performance of the search.)
242 *
243 * The iterator state after this search is undefined
244 * if the source index is out of bounds for the source string.
245 *
246 * @param i source index
247 * @param errorCode ICU error code. Its input value must pass the U_SUCCESS() test,
248 * or else the function returns immediately. Check for U_FAILURE()
249 * on output or use with function chaining. (See User Guide for details.)
250 * @return TRUE if the edit for the source index was found
251 * @stable ICU 59
252 */
253 UBool findSourceIndex(int32_t i, UErrorCode &errorCode) {
254 return findIndex(i, TRUE, errorCode) == 0;
255 }
256
257 /**
258 * Moves the iterator to the edit that contains the destination index.
259 * The destination index may be found in a no-change edit
260 * even if normal iteration would skip no-change edits.
261 * Normal iteration can continue from a found edit.
262 *
263 * The iterator state before this search logically does not matter.
264 * (It may affect the performance of the search.)
265 *
266 * The iterator state after this search is undefined
267 * if the source index is out of bounds for the source string.
268 *
269 * @param i destination index
270 * @param errorCode ICU error code. Its input value must pass the U_SUCCESS() test,
271 * or else the function returns immediately. Check for U_FAILURE()
272 * on output or use with function chaining. (See User Guide for details.)
273 * @return TRUE if the edit for the destination index was found
274 * @stable ICU 60
275 */
276 UBool findDestinationIndex(int32_t i, UErrorCode &errorCode) {
277 return findIndex(i, FALSE, errorCode) == 0;
278 }
279
280 /**
281 * Computes the destination index corresponding to the given source index.
282 * If the source index is inside a change edit (not at its start),
283 * then the destination index at the end of that edit is returned,
284 * since there is no information about index mapping inside a change edit.
285 *
286 * (This means that indexes to the start and middle of an edit,
287 * for example around a grapheme cluster, are mapped to indexes
288 * encompassing the entire edit.
289 * The alternative, mapping an interior index to the start,
290 * would map such an interval to an empty one.)
291 *
292 * This operation will usually but not always modify this object.
293 * The iterator state after this search is undefined.
294 *
295 * @param i source index
296 * @param errorCode ICU error code. Its input value must pass the U_SUCCESS() test,
297 * or else the function returns immediately. Check for U_FAILURE()
298 * on output or use with function chaining. (See User Guide for details.)
299 * @return destination index; undefined if i is not 0..string length
300 * @stable ICU 60
301 */
302 int32_t destinationIndexFromSourceIndex(int32_t i, UErrorCode &errorCode);
303
304 /**
305 * Computes the source index corresponding to the given destination index.
306 * If the destination index is inside a change edit (not at its start),
307 * then the source index at the end of that edit is returned,
308 * since there is no information about index mapping inside a change edit.
309 *
310 * (This means that indexes to the start and middle of an edit,
311 * for example around a grapheme cluster, are mapped to indexes
312 * encompassing the entire edit.
313 * The alternative, mapping an interior index to the start,
314 * would map such an interval to an empty one.)
315 *
316 * This operation will usually but not always modify this object.
317 * The iterator state after this search is undefined.
318 *
319 * @param i destination index
320 * @param errorCode ICU error code. Its input value must pass the U_SUCCESS() test,
321 * or else the function returns immediately. Check for U_FAILURE()
322 * on output or use with function chaining. (See User Guide for details.)
323 * @return source index; undefined if i is not 0..string length
324 * @stable ICU 60
325 */
326 int32_t sourceIndexFromDestinationIndex(int32_t i, UErrorCode &errorCode);
327
328 /**
329 * Returns whether the edit currently represented by the iterator is a change edit.
330 *
331 * @return TRUE if this edit replaces oldLength() units with newLength() different ones.
332 * FALSE if oldLength units remain unchanged.
333 * @stable ICU 59
334 */
335 UBool hasChange() const { return changed; }
336
337 /**
338 * The length of the current span in the source string, which starts at {@link #sourceIndex}.
339 *
340 * @return the number of units in the original string which are replaced or remain unchanged.
341 * @stable ICU 59
342 */
343 int32_t oldLength() const { return oldLength_; }
344
345 /**
346 * The length of the current span in the destination string, which starts at
347 * {@link #destinationIndex}, or in the replacement string, which starts at
348 * {@link #replacementIndex}.
349 *
350 * @return the number of units in the modified string, if hasChange() is TRUE.
351 * Same as oldLength if hasChange() is FALSE.
352 * @stable ICU 59
353 */
354 int32_t newLength() const { return newLength_; }
355
356 /**
357 * The start index of the current span in the source string; the span has length
358 * {@link #oldLength}.
359 *
360 * @return the current index into the source string
361 * @stable ICU 59
362 */
363 int32_t sourceIndex() const { return srcIndex; }
364
365 /**
366 * The start index of the current span in the replacement string; the span has length
367 * {@link #newLength}. Well-defined only if the current edit is a change edit.
368 *
369 * The *replacement string* is the concatenation of all substrings of the destination
370 * string corresponding to change edits.
371 *
372 * This method is intended to be used together with operations that write only replacement
373 * characters (e.g. operations specifying the \ref U_OMIT_UNCHANGED_TEXT option).
374 * The source string can then be modified in-place.
375 *
376 * @return the current index into the replacement-characters-only string,
377 * not counting unchanged spans
378 * @stable ICU 59
379 */
380 int32_t replacementIndex() const {
381 // TODO: Throw an exception if we aren't in a change edit?
382 return replIndex;
383 }
384
385 /**
386 * The start index of the current span in the destination string; the span has length
387 * {@link #newLength}.
388 *
389 * @return the current index into the full destination string
390 * @stable ICU 59
391 */
392 int32_t destinationIndex() const { return destIndex; }
393
394#ifndef U_HIDE_INTERNAL_API
395 /**
396 * A string representation of the current edit represented by the iterator for debugging. You
397 * should not depend on the contents of the return string.
398 * @internal
399 */
400 UnicodeString& toString(UnicodeString& appendTo) const;
401#endif // U_HIDE_INTERNAL_API
402
403 private:
404 friend class Edits;
405
406 Iterator(const uint16_t *a, int32_t len, UBool oc, UBool crs);
407
408 int32_t readLength(int32_t head);
409 void updateNextIndexes();
410 void updatePreviousIndexes();
411 UBool noNext();
412 UBool next(UBool onlyChanges, UErrorCode &errorCode);
413 UBool previous(UErrorCode &errorCode);
414 /** @return -1: error or i<0; 0: found; 1: i>=string length */
415 int32_t findIndex(int32_t i, UBool findSource, UErrorCode &errorCode);
416
417 const uint16_t *array;
418 int32_t index, length;
419 // 0 if we are not within compressed equal-length changes.
420 // Otherwise the number of remaining changes, including the current one.
421 int32_t remaining;
422 UBool onlyChanges_, coarse;
423
424 int8_t dir; // iteration direction: back(<0), initial(0), forward(>0)
425 UBool changed;
426 int32_t oldLength_, newLength_;
427 int32_t srcIndex, replIndex, destIndex;
428 };
429
430 /**
431 * Returns an Iterator for coarse-grained change edits
432 * (adjacent change edits are treated as one).
433 * Can be used to perform simple string updates.
434 * Skips no-change edits.
435 * @return an Iterator that merges adjacent changes.
436 * @stable ICU 59
437 */
438 Iterator getCoarseChangesIterator() const {
439 return Iterator(array, length, TRUE, TRUE);
440 }
441
442 /**
443 * Returns an Iterator for coarse-grained change and no-change edits
444 * (adjacent change edits are treated as one).
445 * Can be used to perform simple string updates.
446 * Adjacent change edits are treated as one edit.
447 * @return an Iterator that merges adjacent changes.
448 * @stable ICU 59
449 */
450 Iterator getCoarseIterator() const {
451 return Iterator(array, length, FALSE, TRUE);
452 }
453
454 /**
455 * Returns an Iterator for fine-grained change edits
456 * (full granularity of change edits is retained).
457 * Can be used for modifying styled text.
458 * Skips no-change edits.
459 * @return an Iterator that separates adjacent changes.
460 * @stable ICU 59
461 */
462 Iterator getFineChangesIterator() const {
463 return Iterator(array, length, TRUE, FALSE);
464 }
465
466 /**
467 * Returns an Iterator for fine-grained change and no-change edits
468 * (full granularity of change edits is retained).
469 * Can be used for modifying styled text.
470 * @return an Iterator that separates adjacent changes.
471 * @stable ICU 59
472 */
473 Iterator getFineIterator() const {
474 return Iterator(array, length, FALSE, FALSE);
475 }
476
477 /**
478 * Merges the two input Edits and appends the result to this object.
479 *
480 * Consider two string transformations (for example, normalization and case mapping)
481 * where each records Edits in addition to writing an output string.<br>
482 * Edits ab reflect how substrings of input string a
483 * map to substrings of intermediate string b.<br>
484 * Edits bc reflect how substrings of intermediate string b
485 * map to substrings of output string c.<br>
486 * This function merges ab and bc such that the additional edits
487 * recorded in this object reflect how substrings of input string a
488 * map to substrings of output string c.
489 *
490 * If unrelated Edits are passed in where the output string of the first
491 * has a different length than the input string of the second,
492 * then a U_ILLEGAL_ARGUMENT_ERROR is reported.
493 *
494 * @param ab reflects how substrings of input string a
495 * map to substrings of intermediate string b.
496 * @param bc reflects how substrings of intermediate string b
497 * map to substrings of output string c.
498 * @param errorCode ICU error code. Its input value must pass the U_SUCCESS() test,
499 * or else the function returns immediately. Check for U_FAILURE()
500 * on output or use with function chaining. (See User Guide for details.)
501 * @return *this, with the merged edits appended
502 * @stable ICU 60
503 */
504 Edits &mergeAndAppend(const Edits &ab, const Edits &bc, UErrorCode &errorCode);
505
506private:
507 void releaseArray() U_NOEXCEPT;
508 Edits &copyArray(const Edits &other);
509 Edits &moveArray(Edits &src) U_NOEXCEPT;
510
511 void setLastUnit(int32_t last) { array[length - 1] = (uint16_t)last; }
512 int32_t lastUnit() const { return length > 0 ? array[length - 1] : 0xffff; }
513
514 void append(int32_t r);
515 UBool growArray();
516
517 static const int32_t STACK_CAPACITY = 100;
518 uint16_t *array;
519 int32_t capacity;
520 int32_t length;
521 int32_t delta;
522 int32_t numChanges;
523 UErrorCode errorCode_;
524 uint16_t stackArray[STACK_CAPACITY];
525};
526
527U_NAMESPACE_END
528
529#endif /* U_SHOW_CPLUSPLUS_API */
530
531#endif // __EDITS_H__
532