1/*
2 * jmorecfg.h
3 *
4 * This file was part of the Independent JPEG Group's software:
5 * Copyright (C) 1991-1997, Thomas G. Lane.
6 * Modified 1997-2009 by Guido Vollbeding.
7 * libjpeg-turbo Modifications:
8 * Copyright (C) 2009, 2011, 2014-2015, D. R. Commander.
9 * For conditions of distribution and use, see the accompanying README.ijg
10 * file.
11 *
12 * This file contains additional configuration options that customize the
13 * JPEG software for special applications or support machine-dependent
14 * optimizations. Most users will not need to touch this file.
15 */
16
17
18/*
19 * Maximum number of components (color channels) allowed in JPEG image.
20 * To meet the letter of the JPEG spec, set this to 255. However, darn
21 * few applications need more than 4 channels (maybe 5 for CMYK + alpha
22 * mask). We recommend 10 as a reasonable compromise; use 4 if you are
23 * really short on memory. (Each allowed component costs a hundred or so
24 * bytes of storage, whether actually used in an image or not.)
25 */
26
27#define MAX_COMPONENTS 10 /* maximum number of image components */
28
29
30/*
31 * Basic data types.
32 * You may need to change these if you have a machine with unusual data
33 * type sizes; for example, "char" not 8 bits, "short" not 16 bits,
34 * or "long" not 32 bits. We don't care whether "int" is 16 or 32 bits,
35 * but it had better be at least 16.
36 */
37
38/* Representation of a single sample (pixel element value).
39 * We frequently allocate large arrays of these, so it's important to keep
40 * them small. But if you have memory to burn and access to char or short
41 * arrays is very slow on your hardware, you might want to change these.
42 */
43
44#if BITS_IN_JSAMPLE == 8
45/* JSAMPLE should be the smallest type that will hold the values 0..255.
46 * You can use a signed char by having GETJSAMPLE mask it with 0xFF.
47 */
48
49#ifdef HAVE_UNSIGNED_CHAR
50
51typedef unsigned char JSAMPLE;
52#define GETJSAMPLE(value) ((int) (value))
53
54#else /* not HAVE_UNSIGNED_CHAR */
55
56typedef char JSAMPLE;
57#ifdef __CHAR_UNSIGNED__
58#define GETJSAMPLE(value) ((int) (value))
59#else
60#define GETJSAMPLE(value) ((int) (value) & 0xFF)
61#endif /* __CHAR_UNSIGNED__ */
62
63#endif /* HAVE_UNSIGNED_CHAR */
64
65#define MAXJSAMPLE 255
66#define CENTERJSAMPLE 128
67
68#endif /* BITS_IN_JSAMPLE == 8 */
69
70
71#if BITS_IN_JSAMPLE == 12
72/* JSAMPLE should be the smallest type that will hold the values 0..4095.
73 * On nearly all machines "short" will do nicely.
74 */
75
76typedef short JSAMPLE;
77#define GETJSAMPLE(value) ((int) (value))
78
79#define MAXJSAMPLE 4095
80#define CENTERJSAMPLE 2048
81
82#endif /* BITS_IN_JSAMPLE == 12 */
83
84
85/* Representation of a DCT frequency coefficient.
86 * This should be a signed value of at least 16 bits; "short" is usually OK.
87 * Again, we allocate large arrays of these, but you can change to int
88 * if you have memory to burn and "short" is really slow.
89 */
90
91typedef short JCOEF;
92
93
94/* Compressed datastreams are represented as arrays of JOCTET.
95 * These must be EXACTLY 8 bits wide, at least once they are written to
96 * external storage. Note that when using the stdio data source/destination
97 * managers, this is also the data type passed to fread/fwrite.
98 */
99
100#ifdef HAVE_UNSIGNED_CHAR
101
102typedef unsigned char JOCTET;
103#define GETJOCTET(value) (value)
104
105#else /* not HAVE_UNSIGNED_CHAR */
106
107typedef char JOCTET;
108#ifdef __CHAR_UNSIGNED__
109#define GETJOCTET(value) (value)
110#else
111#define GETJOCTET(value) ((value) & 0xFF)
112#endif /* __CHAR_UNSIGNED__ */
113
114#endif /* HAVE_UNSIGNED_CHAR */
115
116
117/* These typedefs are used for various table entries and so forth.
118 * They must be at least as wide as specified; but making them too big
119 * won't cost a huge amount of memory, so we don't provide special
120 * extraction code like we did for JSAMPLE. (In other words, these
121 * typedefs live at a different point on the speed/space tradeoff curve.)
122 */
123
124/* UINT8 must hold at least the values 0..255. */
125
126#ifdef HAVE_UNSIGNED_CHAR
127typedef unsigned char UINT8;
128#else /* not HAVE_UNSIGNED_CHAR */
129#ifdef __CHAR_UNSIGNED__
130typedef char UINT8;
131#else /* not __CHAR_UNSIGNED__ */
132typedef short UINT8;
133#endif /* __CHAR_UNSIGNED__ */
134#endif /* HAVE_UNSIGNED_CHAR */
135
136/* UINT16 must hold at least the values 0..65535. */
137
138#ifdef HAVE_UNSIGNED_SHORT
139typedef unsigned short UINT16;
140#else /* not HAVE_UNSIGNED_SHORT */
141typedef unsigned int UINT16;
142#endif /* HAVE_UNSIGNED_SHORT */
143
144/* INT16 must hold at least the values -32768..32767. */
145
146#ifndef XMD_H /* X11/xmd.h correctly defines INT16 */
147typedef short INT16;
148#endif
149
150/* INT32 must hold at least signed 32-bit values.
151 *
152 * NOTE: The INT32 typedef dates back to libjpeg v5 (1994.) Integers were
153 * sometimes 16-bit back then (MS-DOS), which is why INT32 is typedef'd to
154 * long. It also wasn't common (or at least as common) in 1994 for INT32 to be
155 * defined by platform headers. Since then, however, INT32 is defined in
156 * several other common places:
157 *
158 * Xmd.h (X11 header) typedefs INT32 to int on 64-bit platforms and long on
159 * 32-bit platforms (i.e always a 32-bit signed type.)
160 *
161 * basetsd.h (Win32 header) typedefs INT32 to int (always a 32-bit signed type
162 * on modern platforms.)
163 *
164 * qglobal.h (Qt header) typedefs INT32 to int (always a 32-bit signed type on
165 * modern platforms.)
166 *
167 * This is a recipe for conflict, since "long" and "int" aren't always
168 * compatible types. Since the definition of INT32 has technically been part
169 * of the libjpeg API for more than 20 years, we can't remove it, but we do not
170 * use it internally any longer. We instead define a separate type (JLONG)
171 * for internal use, which ensures that internal behavior will always be the
172 * same regardless of any external headers that may be included.
173 */
174
175#ifndef XMD_H /* X11/xmd.h correctly defines INT32 */
176#ifndef _BASETSD_H_ /* Microsoft defines it in basetsd.h */
177#ifndef _BASETSD_H /* MinGW is slightly different */
178#ifndef QGLOBAL_H /* Qt defines it in qglobal.h */
179typedef long INT32;
180#endif
181#endif
182#endif
183#endif
184
185/* Datatype used for image dimensions. The JPEG standard only supports
186 * images up to 64K*64K due to 16-bit fields in SOF markers. Therefore
187 * "unsigned int" is sufficient on all machines. However, if you need to
188 * handle larger images and you don't mind deviating from the spec, you
189 * can change this datatype. (Note that changing this datatype will
190 * potentially require modifying the SIMD code. The x86-64 SIMD extensions,
191 * in particular, assume a 32-bit JDIMENSION.)
192 */
193
194typedef unsigned int JDIMENSION;
195
196#define JPEG_MAX_DIMENSION 65500L /* a tad under 64K to prevent overflows */
197
198
199/* These macros are used in all function definitions and extern declarations.
200 * You could modify them if you need to change function linkage conventions;
201 * in particular, you'll need to do that to make the library a Windows DLL.
202 * Another application is to make all functions global for use with debuggers
203 * or code profilers that require it.
204 */
205
206/* a function called through method pointers: */
207#define METHODDEF(type) static type
208/* a function used only in its module: */
209#define LOCAL(type) static type
210/* a function referenced thru EXTERNs: */
211#define GLOBAL(type) type
212/* a reference to a GLOBAL function: */
213#define EXTERN(type) extern type
214
215
216/* Originally, this macro was used as a way of defining function prototypes
217 * for both modern compilers as well as older compilers that did not support
218 * prototype parameters. libjpeg-turbo has never supported these older,
219 * non-ANSI compilers, but the macro is still included because there is some
220 * software out there that uses it.
221 */
222
223#define JMETHOD(type,methodname,arglist) type (*methodname) arglist
224
225
226/* libjpeg-turbo no longer supports platforms that have far symbols (MS-DOS),
227 * but again, some software relies on this macro.
228 */
229
230#undef FAR
231#define FAR
232
233
234/*
235 * On a few systems, type boolean and/or its values FALSE, TRUE may appear
236 * in standard header files. Or you may have conflicts with application-
237 * specific header files that you want to include together with these files.
238 * Defining HAVE_BOOLEAN before including jpeglib.h should make it work.
239 */
240
241#ifndef HAVE_BOOLEAN
242typedef int boolean;
243#endif
244#ifndef FALSE /* in case these macros already exist */
245#define FALSE 0 /* values of boolean */
246#endif
247#ifndef TRUE
248#define TRUE 1
249#endif
250
251
252/*
253 * The remaining options affect code selection within the JPEG library,
254 * but they don't need to be visible to most applications using the library.
255 * To minimize application namespace pollution, the symbols won't be
256 * defined unless JPEG_INTERNALS or JPEG_INTERNAL_OPTIONS has been defined.
257 */
258
259#ifdef JPEG_INTERNALS
260#define JPEG_INTERNAL_OPTIONS
261#endif
262
263#ifdef JPEG_INTERNAL_OPTIONS
264
265
266/*
267 * These defines indicate whether to include various optional functions.
268 * Undefining some of these symbols will produce a smaller but less capable
269 * library. Note that you can leave certain source files out of the
270 * compilation/linking process if you've #undef'd the corresponding symbols.
271 * (You may HAVE to do that if your compiler doesn't like null source files.)
272 */
273
274/* Capability options common to encoder and decoder: */
275
276#define DCT_ISLOW_SUPPORTED /* slow but accurate integer algorithm */
277#define DCT_IFAST_SUPPORTED /* faster, less accurate integer method */
278#define DCT_FLOAT_SUPPORTED /* floating-point: accurate, fast on fast HW */
279
280/* Encoder capability options: */
281
282#define C_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */
283#define C_PROGRESSIVE_SUPPORTED /* Progressive JPEG? (Requires MULTISCAN)*/
284#define ENTROPY_OPT_SUPPORTED /* Optimization of entropy coding parms? */
285/* Note: if you selected 12-bit data precision, it is dangerous to turn off
286 * ENTROPY_OPT_SUPPORTED. The standard Huffman tables are only good for 8-bit
287 * precision, so jchuff.c normally uses entropy optimization to compute
288 * usable tables for higher precision. If you don't want to do optimization,
289 * you'll have to supply different default Huffman tables.
290 * The exact same statements apply for progressive JPEG: the default tables
291 * don't work for progressive mode. (This may get fixed, however.)
292 */
293#define INPUT_SMOOTHING_SUPPORTED /* Input image smoothing option? */
294
295/* Decoder capability options: */
296
297#define D_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */
298#define D_PROGRESSIVE_SUPPORTED /* Progressive JPEG? (Requires MULTISCAN)*/
299#define SAVE_MARKERS_SUPPORTED /* jpeg_save_markers() needed? */
300#define BLOCK_SMOOTHING_SUPPORTED /* Block smoothing? (Progressive only) */
301#define IDCT_SCALING_SUPPORTED /* Output rescaling via IDCT? */
302#undef UPSAMPLE_SCALING_SUPPORTED /* Output rescaling at upsample stage? */
303#define UPSAMPLE_MERGING_SUPPORTED /* Fast path for sloppy upsampling? */
304#define QUANT_1PASS_SUPPORTED /* 1-pass color quantization? */
305#define QUANT_2PASS_SUPPORTED /* 2-pass color quantization? */
306
307/* more capability options later, no doubt */
308
309
310/*
311 * The RGB_RED, RGB_GREEN, RGB_BLUE, and RGB_PIXELSIZE macros are a vestigial
312 * feature of libjpeg. The idea was that, if an application developer needed
313 * to compress from/decompress to a BGR/BGRX/RGBX/XBGR/XRGB buffer, they could
314 * change these macros, rebuild libjpeg, and link their application statically
315 * with it. In reality, few people ever did this, because there were some
316 * severe restrictions involved (cjpeg and djpeg no longer worked properly,
317 * compressing/decompressing RGB JPEGs no longer worked properly, and the color
318 * quantizer wouldn't work with pixel sizes other than 3.) Further, since all
319 * of the O/S-supplied versions of libjpeg were built with the default values
320 * of RGB_RED, RGB_GREEN, RGB_BLUE, and RGB_PIXELSIZE, many applications have
321 * come to regard these values as immutable.
322 *
323 * The libjpeg-turbo colorspace extensions provide a much cleaner way of
324 * compressing from/decompressing to buffers with arbitrary component orders
325 * and pixel sizes. Thus, we do not support changing the values of RGB_RED,
326 * RGB_GREEN, RGB_BLUE, or RGB_PIXELSIZE. In addition to the restrictions
327 * listed above, changing these values will also break the SIMD extensions and
328 * the regression tests.
329 */
330
331#define RGB_RED 0 /* Offset of Red in an RGB scanline element */
332#define RGB_GREEN 1 /* Offset of Green */
333#define RGB_BLUE 2 /* Offset of Blue */
334#define RGB_PIXELSIZE 3 /* JSAMPLEs per RGB scanline element */
335
336#define JPEG_NUMCS 17
337
338#define EXT_RGB_RED 0
339#define EXT_RGB_GREEN 1
340#define EXT_RGB_BLUE 2
341#define EXT_RGB_PIXELSIZE 3
342
343#define EXT_RGBX_RED 0
344#define EXT_RGBX_GREEN 1
345#define EXT_RGBX_BLUE 2
346#define EXT_RGBX_PIXELSIZE 4
347
348#define EXT_BGR_RED 2
349#define EXT_BGR_GREEN 1
350#define EXT_BGR_BLUE 0
351#define EXT_BGR_PIXELSIZE 3
352
353#define EXT_BGRX_RED 2
354#define EXT_BGRX_GREEN 1
355#define EXT_BGRX_BLUE 0
356#define EXT_BGRX_PIXELSIZE 4
357
358#define EXT_XBGR_RED 3
359#define EXT_XBGR_GREEN 2
360#define EXT_XBGR_BLUE 1
361#define EXT_XBGR_PIXELSIZE 4
362
363#define EXT_XRGB_RED 1
364#define EXT_XRGB_GREEN 2
365#define EXT_XRGB_BLUE 3
366#define EXT_XRGB_PIXELSIZE 4
367
368static const int rgb_red[JPEG_NUMCS] = {
369 -1, -1, RGB_RED, -1, -1, -1, EXT_RGB_RED, EXT_RGBX_RED,
370 EXT_BGR_RED, EXT_BGRX_RED, EXT_XBGR_RED, EXT_XRGB_RED,
371 EXT_RGBX_RED, EXT_BGRX_RED, EXT_XBGR_RED, EXT_XRGB_RED,
372 -1
373};
374
375static const int rgb_green[JPEG_NUMCS] = {
376 -1, -1, RGB_GREEN, -1, -1, -1, EXT_RGB_GREEN, EXT_RGBX_GREEN,
377 EXT_BGR_GREEN, EXT_BGRX_GREEN, EXT_XBGR_GREEN, EXT_XRGB_GREEN,
378 EXT_RGBX_GREEN, EXT_BGRX_GREEN, EXT_XBGR_GREEN, EXT_XRGB_GREEN,
379 -1
380};
381
382static const int rgb_blue[JPEG_NUMCS] = {
383 -1, -1, RGB_BLUE, -1, -1, -1, EXT_RGB_BLUE, EXT_RGBX_BLUE,
384 EXT_BGR_BLUE, EXT_BGRX_BLUE, EXT_XBGR_BLUE, EXT_XRGB_BLUE,
385 EXT_RGBX_BLUE, EXT_BGRX_BLUE, EXT_XBGR_BLUE, EXT_XRGB_BLUE,
386 -1
387};
388
389static const int rgb_pixelsize[JPEG_NUMCS] = {
390 -1, -1, RGB_PIXELSIZE, -1, -1, -1, EXT_RGB_PIXELSIZE, EXT_RGBX_PIXELSIZE,
391 EXT_BGR_PIXELSIZE, EXT_BGRX_PIXELSIZE, EXT_XBGR_PIXELSIZE, EXT_XRGB_PIXELSIZE,
392 EXT_RGBX_PIXELSIZE, EXT_BGRX_PIXELSIZE, EXT_XBGR_PIXELSIZE, EXT_XRGB_PIXELSIZE,
393 -1
394};
395
396/* Definitions for speed-related optimizations. */
397
398/* On some machines (notably 68000 series) "int" is 32 bits, but multiplying
399 * two 16-bit shorts is faster than multiplying two ints. Define MULTIPLIER
400 * as short on such a machine. MULTIPLIER must be at least 16 bits wide.
401 */
402
403#ifndef MULTIPLIER
404#ifndef WITH_SIMD
405#define MULTIPLIER int /* type for fastest integer multiply */
406#else
407#define MULTIPLIER short /* prefer 16-bit with SIMD for parellelism */
408#endif
409#endif
410
411
412/* FAST_FLOAT should be either float or double, whichever is done faster
413 * by your compiler. (Note that this type is only used in the floating point
414 * DCT routines, so it only matters if you've defined DCT_FLOAT_SUPPORTED.)
415 */
416
417#ifndef FAST_FLOAT
418#define FAST_FLOAT float
419#endif
420
421#endif /* JPEG_INTERNAL_OPTIONS */
422