1// © 2016 and later: Unicode, Inc. and others.
2// License & terms of use: http://www.unicode.org/copyright.html
3/*
4*******************************************************************************
5*
6* Copyright (C) 2002-2012, International Business Machines
7* Corporation and others. All Rights Reserved.
8*
9*******************************************************************************
10* file name: utf_old.h
11* encoding: UTF-8
12* tab size: 8 (not used)
13* indentation:4
14*
15* created on: 2002sep21
16* created by: Markus W. Scherer
17*/
18
19/**
20 * \file
21 * \brief C API: Deprecated macros for Unicode string handling
22 *
23 * The macros in utf_old.h are all deprecated and their use discouraged.
24 * Some of the design principles behind the set of UTF macros
25 * have changed or proved impractical.
26 * Almost all of the old "UTF macros" are at least renamed.
27 * If you are looking for a new equivalent to an old macro, please see the
28 * comment at the old one.
29 *
30 * Brief summary of reasons for deprecation:
31 * - Switch on UTF_SIZE (selection of UTF-8/16/32 default string processing)
32 * was impractical.
33 * - Switch on UTF_SAFE etc. (selection of unsafe/safe/strict default string processing)
34 * was of little use and impractical.
35 * - Whole classes of macros became obsolete outside of the UTF_SIZE/UTF_SAFE
36 * selection framework: UTF32_ macros (all trivial)
37 * and UTF_ default and intermediate macros (all aliases).
38 * - The selection framework also caused many macro aliases.
39 * - Change in Unicode standard: "irregular" sequences (3.0) became illegal (3.2).
40 * - Change of language in Unicode standard:
41 * Growing distinction between internal x-bit Unicode strings and external UTF-x
42 * forms, with the former more lenient.
43 * Suggests renaming of UTF16_ macros to U16_.
44 * - The prefix "UTF_" without a width number confused some users.
45 * - "Safe" append macros needed the addition of an error indicator output.
46 * - "Safe" UTF-8 macros used legitimate (if rarely used) code point values
47 * to indicate error conditions.
48 * - The use of the "_CHAR" infix for code point operations confused some users.
49 *
50 * More details:
51 *
52 * Until ICU 2.2, utf.h theoretically allowed to choose among UTF-8/16/32
53 * for string processing, and among unsafe/safe/strict default macros for that.
54 *
55 * It proved nearly impossible to write non-trivial, high-performance code
56 * that is UTF-generic.
57 * Unsafe default macros would be dangerous for default string processing,
58 * and the main reason for the "strict" versions disappeared:
59 * Between Unicode 3.0 and 3.2 all "irregular" UTF-8 sequences became illegal.
60 * The only other conditions that "strict" checked for were non-characters,
61 * which are valid during processing. Only during text input/output should they
62 * be checked, and at that time other well-formedness checks may be
63 * necessary or useful as well.
64 * This can still be done by using U16_NEXT and U_IS_UNICODE_NONCHAR
65 * or U_IS_UNICODE_CHAR.
66 *
67 * The old UTF8_..._SAFE macros also used some normal Unicode code points
68 * to indicate malformed sequences.
69 * The new UTF8_ macros without suffix use negative values instead.
70 *
71 * The entire contents of utf32.h was moved here without replacement
72 * because all those macros were trivial and
73 * were meaningful only in the framework of choosing the UTF size.
74 *
75 * See Jitterbug 2150 and its discussion on the ICU mailing list
76 * in September 2002.
77 *
78 * <hr>
79 *
80 * <em>Obsolete part</em> of pre-ICU 2.4 utf.h file documentation:
81 *
82 * <p>The original concept for these files was for ICU to allow
83 * in principle to set which UTF (UTF-8/16/32) is used internally
84 * by defining UTF_SIZE to either 8, 16, or 32. utf.h would then define the UChar type
85 * accordingly. UTF-16 was the default.</p>
86 *
87 * <p>This concept has been abandoned.
88 * A lot of the ICU source code assumes UChar strings are in UTF-16.
89 * This is especially true for low-level code like
90 * conversion, normalization, and collation.
91 * The utf.h header enforces the default of UTF-16.
92 * The UTF-8 and UTF-32 macros remain for now for completeness and backward compatibility.</p>
93 *
94 * <p>Accordingly, utf.h defines UChar to be an unsigned 16-bit integer. If this matches wchar_t, then
95 * UChar is defined to be exactly wchar_t, otherwise uint16_t.</p>
96 *
97 * <p>UChar32 is defined to be a signed 32-bit integer (int32_t), large enough for a 21-bit
98 * Unicode code point (Unicode scalar value, 0..0x10ffff).
99 * Before ICU 2.4, the definition of UChar32 was similarly platform-dependent as
100 * the definition of UChar. For details see the documentation for UChar32 itself.</p>
101 *
102 * <p>utf.h also defines a number of C macros for handling single Unicode code points and
103 * for using UTF Unicode strings. It includes utf8.h, utf16.h, and utf32.h for the actual
104 * implementations of those macros and then aliases one set of them (for UTF-16) for general use.
105 * The UTF-specific macros have the UTF size in the macro name prefixes (UTF16_...), while
106 * the general alias macros always begin with UTF_...</p>
107 *
108 * <p>Many string operations can be done with or without error checking.
109 * Where such a distinction is useful, there are two versions of the macros, "unsafe" and "safe"
110 * ones with ..._UNSAFE and ..._SAFE suffixes. The unsafe macros are fast but may cause
111 * program failures if the strings are not well-formed. The safe macros have an additional, boolean
112 * parameter "strict". If strict is false, then only illegal sequences are detected.
113 * Otherwise, irregular sequences and non-characters are detected as well (like single surrogates).
114 * Safe macros return special error code points for illegal/irregular sequences:
115 * Typically, U+ffff, or values that would result in a code unit sequence of the same length
116 * as the erroneous input sequence.<br>
117 * Note that _UNSAFE macros have fewer parameters: They do not have the strictness parameter, and
118 * they do not have start/length parameters for boundary checking.</p>
119 *
120 * <p>Here, the macros are aliased in two steps:
121 * In the first step, the UTF-specific macros with UTF16_ prefix and _UNSAFE and _SAFE suffixes are
122 * aliased according to the UTF_SIZE to macros with UTF_ prefix and the same suffixes and signatures.
123 * Then, in a second step, the default, general alias macros are set to use either the unsafe or
124 * the safe/not strict (default) or the safe/strict macro;
125 * these general macros do not have a strictness parameter.</p>
126 *
127 * <p>It is possible to change the default choice for the general alias macros to be unsafe, safe/not strict or safe/strict.
128 * The default is safe/not strict. It is not recommended to select the unsafe macros as the basis for
129 * Unicode string handling in ICU! To select this, define UTF_SAFE, UTF_STRICT, or UTF_UNSAFE.</p>
130 *
131 * <p>For general use, one should use the default, general macros with UTF_ prefix and no _SAFE/_UNSAFE suffix.
132 * Only in some cases it may be necessary to control the choice of macro directly and use a less generic alias.
133 * For example, if it can be assumed that a string is well-formed and the index will stay within the bounds,
134 * then the _UNSAFE version may be used.
135 * If a UTF-8 string is to be processed, then the macros with UTF8_ prefixes need to be used.</p>
136 *
137 * <hr>
138 *
139 * Deprecated ICU 2.4. Use the macros in utf.h, utf16.h, utf8.h instead.
140 */
141
142#ifndef __UTF_OLD_H__
143#define __UTF_OLD_H__
144
145#include "unicode/utf.h"
146#include "unicode/utf8.h"
147#include "unicode/utf16.h"
148
149/**
150 * \def U_HIDE_OBSOLETE_UTF_OLD_H
151 *
152 * Hides the obsolete definitions in unicode/utf_old.h.
153 * Recommended to be set to 1 at compile time to make sure
154 * the long-deprecated macros are no longer used.
155 *
156 * For reasons for the deprecation see the utf_old.h file comments.
157 *
158 * @internal
159 */
160#ifndef U_HIDE_OBSOLETE_UTF_OLD_H
161# define U_HIDE_OBSOLETE_UTF_OLD_H 0
162#endif
163
164#if !defined(U_HIDE_DEPRECATED_API) && !U_HIDE_OBSOLETE_UTF_OLD_H
165
166/* Formerly utf.h, part 1 --------------------------------------------------- */
167
168#ifdef U_USE_UTF_DEPRECATES
169/**
170 * Unicode string and array offset and index type.
171 * ICU always counts Unicode code units (UChars) for
172 * string offsets, indexes, and lengths, not Unicode code points.
173 *
174 * @obsolete ICU 2.6. Use int32_t directly instead since this API will be removed in that release.
175 */
176typedef int32_t UTextOffset;
177#endif
178
179/** Number of bits in a Unicode string code unit - ICU uses 16-bit Unicode. @deprecated ICU 2.4. Obsolete, see utf_old.h. */
180#define UTF_SIZE 16
181
182/**
183 * The default choice for general Unicode string macros is to use the ..._SAFE macro implementations
184 * with strict=false.
185 *
186 * @deprecated ICU 2.4. Obsolete, see utf_old.h.
187 */
188#define UTF_SAFE
189/** @deprecated ICU 2.4. Obsolete, see utf_old.h. */
190#undef UTF_UNSAFE
191/** @deprecated ICU 2.4. Obsolete, see utf_old.h. */
192#undef UTF_STRICT
193
194/**
195 * UTF8_ERROR_VALUE_1 and UTF8_ERROR_VALUE_2 are special error values for UTF-8,
196 * which need 1 or 2 bytes in UTF-8:
197 * \code
198 * U+0015 = NAK = Negative Acknowledge, C0 control character
199 * U+009f = highest C1 control character
200 * \endcode
201 *
202 * These are used by UTF8_..._SAFE macros so that they can return an error value
203 * that needs the same number of code units (bytes) as were seen by
204 * a macro. They should be tested with UTF_IS_ERROR() or UTF_IS_VALID().
205 *
206 * @deprecated ICU 2.4. Obsolete, see utf_old.h.
207 */
208#define UTF8_ERROR_VALUE_1 0x15
209
210/**
211 * See documentation on UTF8_ERROR_VALUE_1 for details.
212 *
213 * @deprecated ICU 2.4. Obsolete, see utf_old.h.
214 */
215#define UTF8_ERROR_VALUE_2 0x9f
216
217/**
218 * Error value for all UTFs. This code point value will be set by macros with error
219 * checking if an error is detected.
220 *
221 * @deprecated ICU 2.4. Obsolete, see utf_old.h.
222 */
223#define UTF_ERROR_VALUE 0xffff
224
225/**
226 * Is a given 32-bit code an error value
227 * as returned by one of the macros for any UTF?
228 *
229 * @deprecated ICU 2.4. Obsolete, see utf_old.h.
230 */
231#define UTF_IS_ERROR(c) \
232 (((c)&0xfffe)==0xfffe || (c)==UTF8_ERROR_VALUE_1 || (c)==UTF8_ERROR_VALUE_2)
233
234/**
235 * This is a combined macro: Is c a valid Unicode value _and_ not an error code?
236 *
237 * @deprecated ICU 2.4. Obsolete, see utf_old.h.
238 */
239#define UTF_IS_VALID(c) \
240 (UTF_IS_UNICODE_CHAR(c) && \
241 (c)!=UTF8_ERROR_VALUE_1 && (c)!=UTF8_ERROR_VALUE_2)
242
243/**
244 * Is this code unit or code point a surrogate (U+d800..U+dfff)?
245 * @deprecated ICU 2.4. Renamed to U_IS_SURROGATE and U16_IS_SURROGATE, see utf_old.h.
246 */
247#define UTF_IS_SURROGATE(uchar) (((uchar)&0xfffff800)==0xd800)
248
249/**
250 * Is a given 32-bit code point a Unicode noncharacter?
251 *
252 * @deprecated ICU 2.4. Renamed to U_IS_UNICODE_NONCHAR, see utf_old.h.
253 */
254#define UTF_IS_UNICODE_NONCHAR(c) \
255 ((c)>=0xfdd0 && \
256 ((uint32_t)(c)<=0xfdef || ((c)&0xfffe)==0xfffe) && \
257 (uint32_t)(c)<=0x10ffff)
258
259/**
260 * Is a given 32-bit value a Unicode code point value (0..U+10ffff)
261 * that can be assigned a character?
262 *
263 * Code points that are not characters include:
264 * - single surrogate code points (U+d800..U+dfff, 2048 code points)
265 * - the last two code points on each plane (U+__fffe and U+__ffff, 34 code points)
266 * - U+fdd0..U+fdef (new with Unicode 3.1, 32 code points)
267 * - the highest Unicode code point value is U+10ffff
268 *
269 * This means that all code points below U+d800 are character code points,
270 * and that boundary is tested first for performance.
271 *
272 * @deprecated ICU 2.4. Renamed to U_IS_UNICODE_CHAR, see utf_old.h.
273 */
274#define UTF_IS_UNICODE_CHAR(c) \
275 ((uint32_t)(c)<0xd800 || \
276 ((uint32_t)(c)>0xdfff && \
277 (uint32_t)(c)<=0x10ffff && \
278 !UTF_IS_UNICODE_NONCHAR(c)))
279
280/* Formerly utf8.h ---------------------------------------------------------- */
281
282/**
283* \var utf8_countTrailBytes
284* Internal array with numbers of trail bytes for any given byte used in
285* lead byte position.
286*
287* This is internal since it is not meant to be called directly by external clients;
288* however it is called by public macros in this file and thus must remain stable,
289* and should not be hidden when other internal functions are hidden (otherwise
290* public macros would fail to compile).
291* @internal
292*/
293#ifdef U_UTF8_IMPL
294// No forward declaration if compiling utf_impl.cpp, which defines utf8_countTrailBytes.
295#elif defined(U_STATIC_IMPLEMENTATION) || defined(U_COMMON_IMPLEMENTATION)
296U_CAPI const uint8_t utf8_countTrailBytes[];
297#else
298U_CFUNC U_IMPORT const uint8_t utf8_countTrailBytes[];
299#endif
300
301/**
302 * Count the trail bytes for a UTF-8 lead byte.
303 * @deprecated ICU 2.4. Renamed to U8_COUNT_TRAIL_BYTES, see utf_old.h.
304 */
305#define UTF8_COUNT_TRAIL_BYTES(leadByte) (utf8_countTrailBytes[(uint8_t)leadByte])
306
307/**
308 * Mask a UTF-8 lead byte, leave only the lower bits that form part of the code point value.
309 * @deprecated ICU 2.4. Renamed to U8_MASK_LEAD_BYTE, see utf_old.h.
310 */
311#define UTF8_MASK_LEAD_BYTE(leadByte, countTrailBytes) ((leadByte)&=(1<<(6-(countTrailBytes)))-1)
312
313/** Is this this code point a single code unit (byte)? @deprecated ICU 2.4. Renamed to U8_IS_SINGLE, see utf_old.h. */
314#define UTF8_IS_SINGLE(uchar) (((uchar)&0x80)==0)
315/** Is this this code unit the lead code unit (byte) of a code point? @deprecated ICU 2.4. Renamed to U8_IS_LEAD, see utf_old.h. */
316#define UTF8_IS_LEAD(uchar) ((uint8_t)((uchar)-0xc0)<0x3e)
317/** Is this this code unit a trailing code unit (byte) of a code point? @deprecated ICU 2.4. Renamed to U8_IS_TRAIL, see utf_old.h. */
318#define UTF8_IS_TRAIL(uchar) (((uchar)&0xc0)==0x80)
319
320/** Does this scalar Unicode value need multiple code units for storage? @deprecated ICU 2.4. Use U8_LENGTH or test ((uint32_t)(c)>0x7f) instead, see utf_old.h. */
321#define UTF8_NEED_MULTIPLE_UCHAR(c) ((uint32_t)(c)>0x7f)
322
323/**
324 * Given the lead character, how many bytes are taken by this code point.
325 * ICU does not deal with code points >0x10ffff
326 * unless necessary for advancing in the byte stream.
327 *
328 * These length macros take into account that for values >0x10ffff
329 * the UTF8_APPEND_CHAR_SAFE macros would write the error code point 0xffff
330 * with 3 bytes.
331 * Code point comparisons need to be in uint32_t because UChar32
332 * may be a signed type, and negative values must be recognized.
333 *
334 * @deprecated ICU 2.4. Use U8_LENGTH instead, see utf.h.
335 */
336#if 1
337# define UTF8_CHAR_LENGTH(c) \
338 ((uint32_t)(c)<=0x7f ? 1 : \
339 ((uint32_t)(c)<=0x7ff ? 2 : \
340 ((uint32_t)((c)-0x10000)>0xfffff ? 3 : 4) \
341 ) \
342 )
343#else
344# define UTF8_CHAR_LENGTH(c) \
345 ((uint32_t)(c)<=0x7f ? 1 : \
346 ((uint32_t)(c)<=0x7ff ? 2 : \
347 ((uint32_t)(c)<=0xffff ? 3 : \
348 ((uint32_t)(c)<=0x10ffff ? 4 : \
349 ((uint32_t)(c)<=0x3ffffff ? 5 : \
350 ((uint32_t)(c)<=0x7fffffff ? 6 : 3) \
351 ) \
352 ) \
353 ) \
354 ) \
355 )
356#endif
357
358/** The maximum number of bytes per code point. @deprecated ICU 2.4. Renamed to U8_MAX_LENGTH, see utf_old.h. */
359#define UTF8_MAX_CHAR_LENGTH 4
360
361/** Average number of code units compared to UTF-16. @deprecated ICU 2.4. Obsolete, see utf_old.h. */
362#define UTF8_ARRAY_SIZE(size) ((5*(size))/2)
363
364/** @deprecated ICU 2.4. Renamed to U8_GET_UNSAFE, see utf_old.h. */
365#define UTF8_GET_CHAR_UNSAFE(s, i, c) UPRV_BLOCK_MACRO_BEGIN { \
366 int32_t _utf8_get_char_unsafe_index=(int32_t)(i); \
367 UTF8_SET_CHAR_START_UNSAFE(s, _utf8_get_char_unsafe_index); \
368 UTF8_NEXT_CHAR_UNSAFE(s, _utf8_get_char_unsafe_index, c); \
369} UPRV_BLOCK_MACRO_END
370
371/** @deprecated ICU 2.4. Use U8_GET instead, see utf_old.h. */
372#define UTF8_GET_CHAR_SAFE(s, start, i, length, c, strict) UPRV_BLOCK_MACRO_BEGIN { \
373 int32_t _utf8_get_char_safe_index=(int32_t)(i); \
374 UTF8_SET_CHAR_START_SAFE(s, start, _utf8_get_char_safe_index); \
375 UTF8_NEXT_CHAR_SAFE(s, _utf8_get_char_safe_index, length, c, strict); \
376} UPRV_BLOCK_MACRO_END
377
378/** @deprecated ICU 2.4. Renamed to U8_NEXT_UNSAFE, see utf_old.h. */
379#define UTF8_NEXT_CHAR_UNSAFE(s, i, c) UPRV_BLOCK_MACRO_BEGIN { \
380 (c)=(s)[(i)++]; \
381 if((uint8_t)((c)-0xc0)<0x35) { \
382 uint8_t __count=UTF8_COUNT_TRAIL_BYTES(c); \
383 UTF8_MASK_LEAD_BYTE(c, __count); \
384 switch(__count) { \
385 /* each following branch falls through to the next one */ \
386 case 3: \
387 (c)=((c)<<6)|((s)[(i)++]&0x3f); \
388 case 2: \
389 (c)=((c)<<6)|((s)[(i)++]&0x3f); \
390 case 1: \
391 (c)=((c)<<6)|((s)[(i)++]&0x3f); \
392 /* no other branches to optimize switch() */ \
393 break; \
394 } \
395 } \
396} UPRV_BLOCK_MACRO_END
397
398/** @deprecated ICU 2.4. Renamed to U8_APPEND_UNSAFE, see utf_old.h. */
399#define UTF8_APPEND_CHAR_UNSAFE(s, i, c) UPRV_BLOCK_MACRO_BEGIN { \
400 if((uint32_t)(c)<=0x7f) { \
401 (s)[(i)++]=(uint8_t)(c); \
402 } else { \
403 if((uint32_t)(c)<=0x7ff) { \
404 (s)[(i)++]=(uint8_t)(((c)>>6)|0xc0); \
405 } else { \
406 if((uint32_t)(c)<=0xffff) { \
407 (s)[(i)++]=(uint8_t)(((c)>>12)|0xe0); \
408 } else { \
409 (s)[(i)++]=(uint8_t)(((c)>>18)|0xf0); \
410 (s)[(i)++]=(uint8_t)((((c)>>12)&0x3f)|0x80); \
411 } \
412 (s)[(i)++]=(uint8_t)((((c)>>6)&0x3f)|0x80); \
413 } \
414 (s)[(i)++]=(uint8_t)(((c)&0x3f)|0x80); \
415 } \
416} UPRV_BLOCK_MACRO_END
417
418/** @deprecated ICU 2.4. Renamed to U8_FWD_1_UNSAFE, see utf_old.h. */
419#define UTF8_FWD_1_UNSAFE(s, i) UPRV_BLOCK_MACRO_BEGIN { \
420 (i)+=1+UTF8_COUNT_TRAIL_BYTES((s)[i]); \
421} UPRV_BLOCK_MACRO_END
422
423/** @deprecated ICU 2.4. Renamed to U8_FWD_N_UNSAFE, see utf_old.h. */
424#define UTF8_FWD_N_UNSAFE(s, i, n) UPRV_BLOCK_MACRO_BEGIN { \
425 int32_t __N=(n); \
426 while(__N>0) { \
427 UTF8_FWD_1_UNSAFE(s, i); \
428 --__N; \
429 } \
430} UPRV_BLOCK_MACRO_END
431
432/** @deprecated ICU 2.4. Renamed to U8_SET_CP_START_UNSAFE, see utf_old.h. */
433#define UTF8_SET_CHAR_START_UNSAFE(s, i) UPRV_BLOCK_MACRO_BEGIN { \
434 while(UTF8_IS_TRAIL((s)[i])) { --(i); } \
435} UPRV_BLOCK_MACRO_END
436
437/** @deprecated ICU 2.4. Use U8_NEXT instead, see utf_old.h. */
438#define UTF8_NEXT_CHAR_SAFE(s, i, length, c, strict) UPRV_BLOCK_MACRO_BEGIN { \
439 (c)=(s)[(i)++]; \
440 if((c)>=0x80) { \
441 if(UTF8_IS_LEAD(c)) { \
442 (c)=utf8_nextCharSafeBody(s, &(i), (int32_t)(length), c, strict); \
443 } else { \
444 (c)=UTF8_ERROR_VALUE_1; \
445 } \
446 } \
447} UPRV_BLOCK_MACRO_END
448
449/** @deprecated ICU 2.4. Use U8_APPEND instead, see utf_old.h. */
450#define UTF8_APPEND_CHAR_SAFE(s, i, length, c) UPRV_BLOCK_MACRO_BEGIN { \
451 if((uint32_t)(c)<=0x7f) { \
452 (s)[(i)++]=(uint8_t)(c); \
453 } else { \
454 (i)=utf8_appendCharSafeBody(s, (int32_t)(i), (int32_t)(length), c, NULL); \
455 } \
456} UPRV_BLOCK_MACRO_END
457
458/** @deprecated ICU 2.4. Renamed to U8_FWD_1, see utf_old.h. */
459#define UTF8_FWD_1_SAFE(s, i, length) U8_FWD_1(s, i, length)
460
461/** @deprecated ICU 2.4. Renamed to U8_FWD_N, see utf_old.h. */
462#define UTF8_FWD_N_SAFE(s, i, length, n) U8_FWD_N(s, i, length, n)
463
464/** @deprecated ICU 2.4. Renamed to U8_SET_CP_START, see utf_old.h. */
465#define UTF8_SET_CHAR_START_SAFE(s, start, i) U8_SET_CP_START(s, start, i)
466
467/** @deprecated ICU 2.4. Renamed to U8_PREV_UNSAFE, see utf_old.h. */
468#define UTF8_PREV_CHAR_UNSAFE(s, i, c) UPRV_BLOCK_MACRO_BEGIN { \
469 (c)=(s)[--(i)]; \
470 if(UTF8_IS_TRAIL(c)) { \
471 uint8_t __b, __count=1, __shift=6; \
472\
473 /* c is a trail byte */ \
474 (c)&=0x3f; \
475 for(;;) { \
476 __b=(s)[--(i)]; \
477 if(__b>=0xc0) { \
478 UTF8_MASK_LEAD_BYTE(__b, __count); \
479 (c)|=(UChar32)__b<<__shift; \
480 break; \
481 } else { \
482 (c)|=(UChar32)(__b&0x3f)<<__shift; \
483 ++__count; \
484 __shift+=6; \
485 } \
486 } \
487 } \
488} UPRV_BLOCK_MACRO_END
489
490/** @deprecated ICU 2.4. Renamed to U8_BACK_1_UNSAFE, see utf_old.h. */
491#define UTF8_BACK_1_UNSAFE(s, i) UPRV_BLOCK_MACRO_BEGIN { \
492 while(UTF8_IS_TRAIL((s)[--(i)])) {} \
493} UPRV_BLOCK_MACRO_END
494
495/** @deprecated ICU 2.4. Renamed to U8_BACK_N_UNSAFE, see utf_old.h. */
496#define UTF8_BACK_N_UNSAFE(s, i, n) UPRV_BLOCK_MACRO_BEGIN { \
497 int32_t __N=(n); \
498 while(__N>0) { \
499 UTF8_BACK_1_UNSAFE(s, i); \
500 --__N; \
501 } \
502} UPRV_BLOCK_MACRO_END
503
504/** @deprecated ICU 2.4. Renamed to U8_SET_CP_LIMIT_UNSAFE, see utf_old.h. */
505#define UTF8_SET_CHAR_LIMIT_UNSAFE(s, i) UPRV_BLOCK_MACRO_BEGIN { \
506 UTF8_BACK_1_UNSAFE(s, i); \
507 UTF8_FWD_1_UNSAFE(s, i); \
508} UPRV_BLOCK_MACRO_END
509
510/** @deprecated ICU 2.4. Use U8_PREV instead, see utf_old.h. */
511#define UTF8_PREV_CHAR_SAFE(s, start, i, c, strict) UPRV_BLOCK_MACRO_BEGIN { \
512 (c)=(s)[--(i)]; \
513 if((c)>=0x80) { \
514 if((c)<=0xbf) { \
515 (c)=utf8_prevCharSafeBody(s, start, &(i), c, strict); \
516 } else { \
517 (c)=UTF8_ERROR_VALUE_1; \
518 } \
519 } \
520} UPRV_BLOCK_MACRO_END
521
522/** @deprecated ICU 2.4. Renamed to U8_BACK_1, see utf_old.h. */
523#define UTF8_BACK_1_SAFE(s, start, i) U8_BACK_1(s, start, i)
524
525/** @deprecated ICU 2.4. Renamed to U8_BACK_N, see utf_old.h. */
526#define UTF8_BACK_N_SAFE(s, start, i, n) U8_BACK_N(s, start, i, n)
527
528/** @deprecated ICU 2.4. Renamed to U8_SET_CP_LIMIT, see utf_old.h. */
529#define UTF8_SET_CHAR_LIMIT_SAFE(s, start, i, length) U8_SET_CP_LIMIT(s, start, i, length)
530
531/* Formerly utf16.h --------------------------------------------------------- */
532
533/** Is uchar a first/lead surrogate? @deprecated ICU 2.4. Renamed to U_IS_LEAD and U16_IS_LEAD, see utf_old.h. */
534#define UTF_IS_FIRST_SURROGATE(uchar) (((uchar)&0xfffffc00)==0xd800)
535
536/** Is uchar a second/trail surrogate? @deprecated ICU 2.4. Renamed to U_IS_TRAIL and U16_IS_TRAIL, see utf_old.h. */
537#define UTF_IS_SECOND_SURROGATE(uchar) (((uchar)&0xfffffc00)==0xdc00)
538
539/** Assuming c is a surrogate, is it a first/lead surrogate? @deprecated ICU 2.4. Renamed to U_IS_SURROGATE_LEAD and U16_IS_SURROGATE_LEAD, see utf_old.h. */
540#define UTF_IS_SURROGATE_FIRST(c) (((c)&0x400)==0)
541
542/** Helper constant for UTF16_GET_PAIR_VALUE. @deprecated ICU 2.4. Renamed to U16_SURROGATE_OFFSET, see utf_old.h. */
543#define UTF_SURROGATE_OFFSET ((0xd800<<10UL)+0xdc00-0x10000)
544
545/** Get the UTF-32 value from the surrogate code units. @deprecated ICU 2.4. Renamed to U16_GET_SUPPLEMENTARY, see utf_old.h. */
546#define UTF16_GET_PAIR_VALUE(first, second) \
547 (((first)<<10UL)+(second)-UTF_SURROGATE_OFFSET)
548
549/** @deprecated ICU 2.4. Renamed to U16_LEAD, see utf_old.h. */
550#define UTF_FIRST_SURROGATE(supplementary) (UChar)(((supplementary)>>10)+0xd7c0)
551
552/** @deprecated ICU 2.4. Renamed to U16_TRAIL, see utf_old.h. */
553#define UTF_SECOND_SURROGATE(supplementary) (UChar)(((supplementary)&0x3ff)|0xdc00)
554
555/** @deprecated ICU 2.4. Renamed to U16_LEAD, see utf_old.h. */
556#define UTF16_LEAD(supplementary) UTF_FIRST_SURROGATE(supplementary)
557
558/** @deprecated ICU 2.4. Renamed to U16_TRAIL, see utf_old.h. */
559#define UTF16_TRAIL(supplementary) UTF_SECOND_SURROGATE(supplementary)
560
561/** @deprecated ICU 2.4. Renamed to U16_IS_SINGLE, see utf_old.h. */
562#define UTF16_IS_SINGLE(uchar) !UTF_IS_SURROGATE(uchar)
563
564/** @deprecated ICU 2.4. Renamed to U16_IS_LEAD, see utf_old.h. */
565#define UTF16_IS_LEAD(uchar) UTF_IS_FIRST_SURROGATE(uchar)
566
567/** @deprecated ICU 2.4. Renamed to U16_IS_TRAIL, see utf_old.h. */
568#define UTF16_IS_TRAIL(uchar) UTF_IS_SECOND_SURROGATE(uchar)
569
570/** Does this scalar Unicode value need multiple code units for storage? @deprecated ICU 2.4. Use U16_LENGTH or test ((uint32_t)(c)>0xffff) instead, see utf_old.h. */
571#define UTF16_NEED_MULTIPLE_UCHAR(c) ((uint32_t)(c)>0xffff)
572
573/** @deprecated ICU 2.4. Renamed to U16_LENGTH, see utf_old.h. */
574#define UTF16_CHAR_LENGTH(c) ((uint32_t)(c)<=0xffff ? 1 : 2)
575
576/** @deprecated ICU 2.4. Renamed to U16_MAX_LENGTH, see utf_old.h. */
577#define UTF16_MAX_CHAR_LENGTH 2
578
579/** Average number of code units compared to UTF-16. @deprecated ICU 2.4. Obsolete, see utf_old.h. */
580#define UTF16_ARRAY_SIZE(size) (size)
581
582/**
583 * Get a single code point from an offset that points to any
584 * of the code units that belong to that code point.
585 * Assume 0<=i<length.
586 *
587 * This could be used for iteration together with
588 * UTF16_CHAR_LENGTH() and UTF_IS_ERROR(),
589 * but the use of UTF16_NEXT_CHAR[_UNSAFE]() and
590 * UTF16_PREV_CHAR[_UNSAFE]() is more efficient for that.
591 * @deprecated ICU 2.4. Renamed to U16_GET_UNSAFE, see utf_old.h.
592 */
593#define UTF16_GET_CHAR_UNSAFE(s, i, c) UPRV_BLOCK_MACRO_BEGIN { \
594 (c)=(s)[i]; \
595 if(UTF_IS_SURROGATE(c)) { \
596 if(UTF_IS_SURROGATE_FIRST(c)) { \
597 (c)=UTF16_GET_PAIR_VALUE((c), (s)[(i)+1]); \
598 } else { \
599 (c)=UTF16_GET_PAIR_VALUE((s)[(i)-1], (c)); \
600 } \
601 } \
602} UPRV_BLOCK_MACRO_END
603
604/** @deprecated ICU 2.4. Use U16_GET instead, see utf_old.h. */
605#define UTF16_GET_CHAR_SAFE(s, start, i, length, c, strict) UPRV_BLOCK_MACRO_BEGIN { \
606 (c)=(s)[i]; \
607 if(UTF_IS_SURROGATE(c)) { \
608 uint16_t __c2; \
609 if(UTF_IS_SURROGATE_FIRST(c)) { \
610 if((i)+1<(length) && UTF_IS_SECOND_SURROGATE(__c2=(s)[(i)+1])) { \
611 (c)=UTF16_GET_PAIR_VALUE((c), __c2); \
612 /* strict: ((c)&0xfffe)==0xfffe is caught by UTF_IS_ERROR() and UTF_IS_UNICODE_CHAR() */ \
613 } else if(strict) {\
614 /* unmatched first surrogate */ \
615 (c)=UTF_ERROR_VALUE; \
616 } \
617 } else { \
618 if((i)-1>=(start) && UTF_IS_FIRST_SURROGATE(__c2=(s)[(i)-1])) { \
619 (c)=UTF16_GET_PAIR_VALUE(__c2, (c)); \
620 /* strict: ((c)&0xfffe)==0xfffe is caught by UTF_IS_ERROR() and UTF_IS_UNICODE_CHAR() */ \
621 } else if(strict) {\
622 /* unmatched second surrogate */ \
623 (c)=UTF_ERROR_VALUE; \
624 } \
625 } \
626 } else if((strict) && !UTF_IS_UNICODE_CHAR(c)) { \
627 (c)=UTF_ERROR_VALUE; \
628 } \
629} UPRV_BLOCK_MACRO_END
630
631/** @deprecated ICU 2.4. Renamed to U16_NEXT_UNSAFE, see utf_old.h. */
632#define UTF16_NEXT_CHAR_UNSAFE(s, i, c) UPRV_BLOCK_MACRO_BEGIN { \
633 (c)=(s)[(i)++]; \
634 if(UTF_IS_FIRST_SURROGATE(c)) { \
635 (c)=UTF16_GET_PAIR_VALUE((c), (s)[(i)++]); \
636 } \
637} UPRV_BLOCK_MACRO_END
638
639/** @deprecated ICU 2.4. Renamed to U16_APPEND_UNSAFE, see utf_old.h. */
640#define UTF16_APPEND_CHAR_UNSAFE(s, i, c) UPRV_BLOCK_MACRO_BEGIN { \
641 if((uint32_t)(c)<=0xffff) { \
642 (s)[(i)++]=(uint16_t)(c); \
643 } else { \
644 (s)[(i)++]=(uint16_t)(((c)>>10)+0xd7c0); \
645 (s)[(i)++]=(uint16_t)(((c)&0x3ff)|0xdc00); \
646 } \
647} UPRV_BLOCK_MACRO_END
648
649/** @deprecated ICU 2.4. Renamed to U16_FWD_1_UNSAFE, see utf_old.h. */
650#define UTF16_FWD_1_UNSAFE(s, i) UPRV_BLOCK_MACRO_BEGIN { \
651 if(UTF_IS_FIRST_SURROGATE((s)[(i)++])) { \
652 ++(i); \
653 } \
654} UPRV_BLOCK_MACRO_END
655
656/** @deprecated ICU 2.4. Renamed to U16_FWD_N_UNSAFE, see utf_old.h. */
657#define UTF16_FWD_N_UNSAFE(s, i, n) UPRV_BLOCK_MACRO_BEGIN { \
658 int32_t __N=(n); \
659 while(__N>0) { \
660 UTF16_FWD_1_UNSAFE(s, i); \
661 --__N; \
662 } \
663} UPRV_BLOCK_MACRO_END
664
665/** @deprecated ICU 2.4. Renamed to U16_SET_CP_START_UNSAFE, see utf_old.h. */
666#define UTF16_SET_CHAR_START_UNSAFE(s, i) UPRV_BLOCK_MACRO_BEGIN { \
667 if(UTF_IS_SECOND_SURROGATE((s)[i])) { \
668 --(i); \
669 } \
670} UPRV_BLOCK_MACRO_END
671
672/** @deprecated ICU 2.4. Use U16_NEXT instead, see utf_old.h. */
673#define UTF16_NEXT_CHAR_SAFE(s, i, length, c, strict) UPRV_BLOCK_MACRO_BEGIN { \
674 (c)=(s)[(i)++]; \
675 if(UTF_IS_FIRST_SURROGATE(c)) { \
676 uint16_t __c2; \
677 if((i)<(length) && UTF_IS_SECOND_SURROGATE(__c2=(s)[(i)])) { \
678 ++(i); \
679 (c)=UTF16_GET_PAIR_VALUE((c), __c2); \
680 /* strict: ((c)&0xfffe)==0xfffe is caught by UTF_IS_ERROR() and UTF_IS_UNICODE_CHAR() */ \
681 } else if(strict) {\
682 /* unmatched first surrogate */ \
683 (c)=UTF_ERROR_VALUE; \
684 } \
685 } else if((strict) && !UTF_IS_UNICODE_CHAR(c)) { \
686 /* unmatched second surrogate or other non-character */ \
687 (c)=UTF_ERROR_VALUE; \
688 } \
689} UPRV_BLOCK_MACRO_END
690
691/** @deprecated ICU 2.4. Use U16_APPEND instead, see utf_old.h. */
692#define UTF16_APPEND_CHAR_SAFE(s, i, length, c) UPRV_BLOCK_MACRO_BEGIN { \
693 if((uint32_t)(c)<=0xffff) { \
694 (s)[(i)++]=(uint16_t)(c); \
695 } else if((uint32_t)(c)<=0x10ffff) { \
696 if((i)+1<(length)) { \
697 (s)[(i)++]=(uint16_t)(((c)>>10)+0xd7c0); \
698 (s)[(i)++]=(uint16_t)(((c)&0x3ff)|0xdc00); \
699 } else /* not enough space */ { \
700 (s)[(i)++]=UTF_ERROR_VALUE; \
701 } \
702 } else /* c>0x10ffff, write error value */ { \
703 (s)[(i)++]=UTF_ERROR_VALUE; \
704 } \
705} UPRV_BLOCK_MACRO_END
706
707/** @deprecated ICU 2.4. Renamed to U16_FWD_1, see utf_old.h. */
708#define UTF16_FWD_1_SAFE(s, i, length) U16_FWD_1(s, i, length)
709
710/** @deprecated ICU 2.4. Renamed to U16_FWD_N, see utf_old.h. */
711#define UTF16_FWD_N_SAFE(s, i, length, n) U16_FWD_N(s, i, length, n)
712
713/** @deprecated ICU 2.4. Renamed to U16_SET_CP_START, see utf_old.h. */
714#define UTF16_SET_CHAR_START_SAFE(s, start, i) U16_SET_CP_START(s, start, i)
715
716/** @deprecated ICU 2.4. Renamed to U16_PREV_UNSAFE, see utf_old.h. */
717#define UTF16_PREV_CHAR_UNSAFE(s, i, c) UPRV_BLOCK_MACRO_BEGIN { \
718 (c)=(s)[--(i)]; \
719 if(UTF_IS_SECOND_SURROGATE(c)) { \
720 (c)=UTF16_GET_PAIR_VALUE((s)[--(i)], (c)); \
721 } \
722} UPRV_BLOCK_MACRO_END
723
724/** @deprecated ICU 2.4. Renamed to U16_BACK_1_UNSAFE, see utf_old.h. */
725#define UTF16_BACK_1_UNSAFE(s, i) UPRV_BLOCK_MACRO_BEGIN { \
726 if(UTF_IS_SECOND_SURROGATE((s)[--(i)])) { \
727 --(i); \
728 } \
729} UPRV_BLOCK_MACRO_END
730
731/** @deprecated ICU 2.4. Renamed to U16_BACK_N_UNSAFE, see utf_old.h. */
732#define UTF16_BACK_N_UNSAFE(s, i, n) UPRV_BLOCK_MACRO_BEGIN { \
733 int32_t __N=(n); \
734 while(__N>0) { \
735 UTF16_BACK_1_UNSAFE(s, i); \
736 --__N; \
737 } \
738} UPRV_BLOCK_MACRO_END
739
740/** @deprecated ICU 2.4. Renamed to U16_SET_CP_LIMIT_UNSAFE, see utf_old.h. */
741#define UTF16_SET_CHAR_LIMIT_UNSAFE(s, i) UPRV_BLOCK_MACRO_BEGIN { \
742 if(UTF_IS_FIRST_SURROGATE((s)[(i)-1])) { \
743 ++(i); \
744 } \
745} UPRV_BLOCK_MACRO_END
746
747/** @deprecated ICU 2.4. Use U16_PREV instead, see utf_old.h. */
748#define UTF16_PREV_CHAR_SAFE(s, start, i, c, strict) UPRV_BLOCK_MACRO_BEGIN { \
749 (c)=(s)[--(i)]; \
750 if(UTF_IS_SECOND_SURROGATE(c)) { \
751 uint16_t __c2; \
752 if((i)>(start) && UTF_IS_FIRST_SURROGATE(__c2=(s)[(i)-1])) { \
753 --(i); \
754 (c)=UTF16_GET_PAIR_VALUE(__c2, (c)); \
755 /* strict: ((c)&0xfffe)==0xfffe is caught by UTF_IS_ERROR() and UTF_IS_UNICODE_CHAR() */ \
756 } else if(strict) {\
757 /* unmatched second surrogate */ \
758 (c)=UTF_ERROR_VALUE; \
759 } \
760 } else if((strict) && !UTF_IS_UNICODE_CHAR(c)) { \
761 /* unmatched first surrogate or other non-character */ \
762 (c)=UTF_ERROR_VALUE; \
763 } \
764} UPRV_BLOCK_MACRO_END
765
766/** @deprecated ICU 2.4. Renamed to U16_BACK_1, see utf_old.h. */
767#define UTF16_BACK_1_SAFE(s, start, i) U16_BACK_1(s, start, i)
768
769/** @deprecated ICU 2.4. Renamed to U16_BACK_N, see utf_old.h. */
770#define UTF16_BACK_N_SAFE(s, start, i, n) U16_BACK_N(s, start, i, n)
771
772/** @deprecated ICU 2.4. Renamed to U16_SET_CP_LIMIT, see utf_old.h. */
773#define UTF16_SET_CHAR_LIMIT_SAFE(s, start, i, length) U16_SET_CP_LIMIT(s, start, i, length)
774
775/* Formerly utf32.h --------------------------------------------------------- */
776
777/*
778* Old documentation:
779*
780* This file defines macros to deal with UTF-32 code units and code points.
781* Signatures and semantics are the same as for the similarly named macros
782* in utf16.h.
783* utf32.h is included by utf.h after unicode/umachine.h</p>
784* and some common definitions.
785* <p><b>Usage:</b> ICU coding guidelines for if() statements should be followed when using these macros.
786* Compound statements (curly braces {}) must be used for if-else-while...
787* bodies and all macro statements should be terminated with semicolon.</p>
788*/
789
790/* internal definitions ----------------------------------------------------- */
791
792/** @deprecated ICU 2.4. Obsolete, see utf_old.h. */
793#define UTF32_IS_SAFE(c, strict) \
794 (!(strict) ? \
795 (uint32_t)(c)<=0x10ffff : \
796 UTF_IS_UNICODE_CHAR(c))
797
798/*
799 * For the semantics of all of these macros, see utf16.h.
800 * The UTF-32 versions are trivial because any code point is
801 * encoded using exactly one code unit.
802 */
803
804/* single-code point definitions -------------------------------------------- */
805
806/* classes of code unit values */
807
808/** @deprecated ICU 2.4. Obsolete, see utf_old.h. */
809#define UTF32_IS_SINGLE(uchar) 1
810/** @deprecated ICU 2.4. Obsolete, see utf_old.h. */
811#define UTF32_IS_LEAD(uchar) 0
812/** @deprecated ICU 2.4. Obsolete, see utf_old.h. */
813#define UTF32_IS_TRAIL(uchar) 0
814
815/* number of code units per code point */
816
817/** @deprecated ICU 2.4. Obsolete, see utf_old.h. */
818#define UTF32_NEED_MULTIPLE_UCHAR(c) 0
819/** @deprecated ICU 2.4. Obsolete, see utf_old.h. */
820#define UTF32_CHAR_LENGTH(c) 1
821/** @deprecated ICU 2.4. Obsolete, see utf_old.h. */
822#define UTF32_MAX_CHAR_LENGTH 1
823
824/* average number of code units compared to UTF-16 */
825
826/** @deprecated ICU 2.4. Obsolete, see utf_old.h. */
827#define UTF32_ARRAY_SIZE(size) (size)
828
829/** @deprecated ICU 2.4. Obsolete, see utf_old.h. */
830#define UTF32_GET_CHAR_UNSAFE(s, i, c) UPRV_BLOCK_MACRO_BEGIN { \
831 (c)=(s)[i]; \
832} UPRV_BLOCK_MACRO_END
833
834/** @deprecated ICU 2.4. Obsolete, see utf_old.h. */
835#define UTF32_GET_CHAR_SAFE(s, start, i, length, c, strict) UPRV_BLOCK_MACRO_BEGIN { \
836 (c)=(s)[i]; \
837 if(!UTF32_IS_SAFE(c, strict)) { \
838 (c)=UTF_ERROR_VALUE; \
839 } \
840} UPRV_BLOCK_MACRO_END
841
842/* definitions with forward iteration --------------------------------------- */
843
844/** @deprecated ICU 2.4. Obsolete, see utf_old.h. */
845#define UTF32_NEXT_CHAR_UNSAFE(s, i, c) UPRV_BLOCK_MACRO_BEGIN { \
846 (c)=(s)[(i)++]; \
847} UPRV_BLOCK_MACRO_END
848
849/** @deprecated ICU 2.4. Obsolete, see utf_old.h. */
850#define UTF32_APPEND_CHAR_UNSAFE(s, i, c) UPRV_BLOCK_MACRO_BEGIN { \
851 (s)[(i)++]=(c); \
852} UPRV_BLOCK_MACRO_END
853
854/** @deprecated ICU 2.4. Obsolete, see utf_old.h. */
855#define UTF32_FWD_1_UNSAFE(s, i) UPRV_BLOCK_MACRO_BEGIN { \
856 ++(i); \
857} UPRV_BLOCK_MACRO_END
858
859/** @deprecated ICU 2.4. Obsolete, see utf_old.h. */
860#define UTF32_FWD_N_UNSAFE(s, i, n) UPRV_BLOCK_MACRO_BEGIN { \
861 (i)+=(n); \
862} UPRV_BLOCK_MACRO_END
863
864/** @deprecated ICU 2.4. Obsolete, see utf_old.h. */
865#define UTF32_SET_CHAR_START_UNSAFE(s, i) UPRV_BLOCK_MACRO_BEGIN { \
866} UPRV_BLOCK_MACRO_END
867
868/** @deprecated ICU 2.4. Obsolete, see utf_old.h. */
869#define UTF32_NEXT_CHAR_SAFE(s, i, length, c, strict) UPRV_BLOCK_MACRO_BEGIN { \
870 (c)=(s)[(i)++]; \
871 if(!UTF32_IS_SAFE(c, strict)) { \
872 (c)=UTF_ERROR_VALUE; \
873 } \
874} UPRV_BLOCK_MACRO_END
875
876/** @deprecated ICU 2.4. Obsolete, see utf_old.h. */
877#define UTF32_APPEND_CHAR_SAFE(s, i, length, c) UPRV_BLOCK_MACRO_BEGIN { \
878 if((uint32_t)(c)<=0x10ffff) { \
879 (s)[(i)++]=(c); \
880 } else /* c>0x10ffff, write 0xfffd */ { \
881 (s)[(i)++]=0xfffd; \
882 } \
883} UPRV_BLOCK_MACRO_END
884
885/** @deprecated ICU 2.4. Obsolete, see utf_old.h. */
886#define UTF32_FWD_1_SAFE(s, i, length) UPRV_BLOCK_MACRO_BEGIN { \
887 ++(i); \
888} UPRV_BLOCK_MACRO_END
889
890/** @deprecated ICU 2.4. Obsolete, see utf_old.h. */
891#define UTF32_FWD_N_SAFE(s, i, length, n) UPRV_BLOCK_MACRO_BEGIN { \
892 if(((i)+=(n))>(length)) { \
893 (i)=(length); \
894 } \
895} UPRV_BLOCK_MACRO_END
896
897/** @deprecated ICU 2.4. Obsolete, see utf_old.h. */
898#define UTF32_SET_CHAR_START_SAFE(s, start, i) UPRV_BLOCK_MACRO_BEGIN { \
899} UPRV_BLOCK_MACRO_END
900
901/* definitions with backward iteration -------------------------------------- */
902
903/** @deprecated ICU 2.4. Obsolete, see utf_old.h. */
904#define UTF32_PREV_CHAR_UNSAFE(s, i, c) UPRV_BLOCK_MACRO_BEGIN { \
905 (c)=(s)[--(i)]; \
906} UPRV_BLOCK_MACRO_END
907
908/** @deprecated ICU 2.4. Obsolete, see utf_old.h. */
909#define UTF32_BACK_1_UNSAFE(s, i) UPRV_BLOCK_MACRO_BEGIN { \
910 --(i); \
911} UPRV_BLOCK_MACRO_END
912
913/** @deprecated ICU 2.4. Obsolete, see utf_old.h. */
914#define UTF32_BACK_N_UNSAFE(s, i, n) UPRV_BLOCK_MACRO_BEGIN { \
915 (i)-=(n); \
916} UPRV_BLOCK_MACRO_END
917
918/** @deprecated ICU 2.4. Obsolete, see utf_old.h. */
919#define UTF32_SET_CHAR_LIMIT_UNSAFE(s, i) UPRV_BLOCK_MACRO_BEGIN { \
920} UPRV_BLOCK_MACRO_END
921
922/** @deprecated ICU 2.4. Obsolete, see utf_old.h. */
923#define UTF32_PREV_CHAR_SAFE(s, start, i, c, strict) UPRV_BLOCK_MACRO_BEGIN { \
924 (c)=(s)[--(i)]; \
925 if(!UTF32_IS_SAFE(c, strict)) { \
926 (c)=UTF_ERROR_VALUE; \
927 } \
928} UPRV_BLOCK_MACRO_END
929
930/** @deprecated ICU 2.4. Obsolete, see utf_old.h. */
931#define UTF32_BACK_1_SAFE(s, start, i) UPRV_BLOCK_MACRO_BEGIN { \
932 --(i); \
933} UPRV_BLOCK_MACRO_END
934
935/** @deprecated ICU 2.4. Obsolete, see utf_old.h. */
936#define UTF32_BACK_N_SAFE(s, start, i, n) UPRV_BLOCK_MACRO_BEGIN { \
937 (i)-=(n); \
938 if((i)<(start)) { \
939 (i)=(start); \
940 } \
941} UPRV_BLOCK_MACRO_END
942
943/** @deprecated ICU 2.4. Obsolete, see utf_old.h. */
944#define UTF32_SET_CHAR_LIMIT_SAFE(s, i, length) UPRV_BLOCK_MACRO_BEGIN { \
945} UPRV_BLOCK_MACRO_END
946
947/* Formerly utf.h, part 2 --------------------------------------------------- */
948
949/**
950 * Estimate the number of code units for a string based on the number of UTF-16 code units.
951 *
952 * @deprecated ICU 2.4. Obsolete, see utf_old.h.
953 */
954#define UTF_ARRAY_SIZE(size) UTF16_ARRAY_SIZE(size)
955
956/** @deprecated ICU 2.4. Renamed to U16_GET_UNSAFE, see utf_old.h. */
957#define UTF_GET_CHAR_UNSAFE(s, i, c) UTF16_GET_CHAR_UNSAFE(s, i, c)
958
959/** @deprecated ICU 2.4. Use U16_GET instead, see utf_old.h. */
960#define UTF_GET_CHAR_SAFE(s, start, i, length, c, strict) UTF16_GET_CHAR_SAFE(s, start, i, length, c, strict)
961
962
963/** @deprecated ICU 2.4. Renamed to U16_NEXT_UNSAFE, see utf_old.h. */
964#define UTF_NEXT_CHAR_UNSAFE(s, i, c) UTF16_NEXT_CHAR_UNSAFE(s, i, c)
965
966/** @deprecated ICU 2.4. Use U16_NEXT instead, see utf_old.h. */
967#define UTF_NEXT_CHAR_SAFE(s, i, length, c, strict) UTF16_NEXT_CHAR_SAFE(s, i, length, c, strict)
968
969
970/** @deprecated ICU 2.4. Renamed to U16_APPEND_UNSAFE, see utf_old.h. */
971#define UTF_APPEND_CHAR_UNSAFE(s, i, c) UTF16_APPEND_CHAR_UNSAFE(s, i, c)
972
973/** @deprecated ICU 2.4. Use U16_APPEND instead, see utf_old.h. */
974#define UTF_APPEND_CHAR_SAFE(s, i, length, c) UTF16_APPEND_CHAR_SAFE(s, i, length, c)
975
976
977/** @deprecated ICU 2.4. Renamed to U16_FWD_1_UNSAFE, see utf_old.h. */
978#define UTF_FWD_1_UNSAFE(s, i) UTF16_FWD_1_UNSAFE(s, i)
979
980/** @deprecated ICU 2.4. Renamed to U16_FWD_1, see utf_old.h. */
981#define UTF_FWD_1_SAFE(s, i, length) UTF16_FWD_1_SAFE(s, i, length)
982
983
984/** @deprecated ICU 2.4. Renamed to U16_FWD_N_UNSAFE, see utf_old.h. */
985#define UTF_FWD_N_UNSAFE(s, i, n) UTF16_FWD_N_UNSAFE(s, i, n)
986
987/** @deprecated ICU 2.4. Renamed to U16_FWD_N, see utf_old.h. */
988#define UTF_FWD_N_SAFE(s, i, length, n) UTF16_FWD_N_SAFE(s, i, length, n)
989
990
991/** @deprecated ICU 2.4. Renamed to U16_SET_CP_START_UNSAFE, see utf_old.h. */
992#define UTF_SET_CHAR_START_UNSAFE(s, i) UTF16_SET_CHAR_START_UNSAFE(s, i)
993
994/** @deprecated ICU 2.4. Renamed to U16_SET_CP_START, see utf_old.h. */
995#define UTF_SET_CHAR_START_SAFE(s, start, i) UTF16_SET_CHAR_START_SAFE(s, start, i)
996
997
998/** @deprecated ICU 2.4. Renamed to U16_PREV_UNSAFE, see utf_old.h. */
999#define UTF_PREV_CHAR_UNSAFE(s, i, c) UTF16_PREV_CHAR_UNSAFE(s, i, c)
1000
1001/** @deprecated ICU 2.4. Use U16_PREV instead, see utf_old.h. */
1002#define UTF_PREV_CHAR_SAFE(s, start, i, c, strict) UTF16_PREV_CHAR_SAFE(s, start, i, c, strict)
1003
1004
1005/** @deprecated ICU 2.4. Renamed to U16_BACK_1_UNSAFE, see utf_old.h. */
1006#define UTF_BACK_1_UNSAFE(s, i) UTF16_BACK_1_UNSAFE(s, i)
1007
1008/** @deprecated ICU 2.4. Renamed to U16_BACK_1, see utf_old.h. */
1009#define UTF_BACK_1_SAFE(s, start, i) UTF16_BACK_1_SAFE(s, start, i)
1010
1011
1012/** @deprecated ICU 2.4. Renamed to U16_BACK_N_UNSAFE, see utf_old.h. */
1013#define UTF_BACK_N_UNSAFE(s, i, n) UTF16_BACK_N_UNSAFE(s, i, n)
1014
1015/** @deprecated ICU 2.4. Renamed to U16_BACK_N, see utf_old.h. */
1016#define UTF_BACK_N_SAFE(s, start, i, n) UTF16_BACK_N_SAFE(s, start, i, n)
1017
1018
1019/** @deprecated ICU 2.4. Renamed to U16_SET_CP_LIMIT_UNSAFE, see utf_old.h. */
1020#define UTF_SET_CHAR_LIMIT_UNSAFE(s, i) UTF16_SET_CHAR_LIMIT_UNSAFE(s, i)
1021
1022/** @deprecated ICU 2.4. Renamed to U16_SET_CP_LIMIT, see utf_old.h. */
1023#define UTF_SET_CHAR_LIMIT_SAFE(s, start, i, length) UTF16_SET_CHAR_LIMIT_SAFE(s, start, i, length)
1024
1025/* Define default macros (UTF-16 "safe") ------------------------------------ */
1026
1027/**
1028 * Does this code unit alone encode a code point (BMP, not a surrogate)?
1029 * Same as UTF16_IS_SINGLE.
1030 * @deprecated ICU 2.4. Renamed to U_IS_SINGLE and U16_IS_SINGLE, see utf_old.h.
1031 */
1032#define UTF_IS_SINGLE(uchar) U16_IS_SINGLE(uchar)
1033
1034/**
1035 * Is this code unit the first one of several (a lead surrogate)?
1036 * Same as UTF16_IS_LEAD.
1037 * @deprecated ICU 2.4. Renamed to U_IS_LEAD and U16_IS_LEAD, see utf_old.h.
1038 */
1039#define UTF_IS_LEAD(uchar) U16_IS_LEAD(uchar)
1040
1041/**
1042 * Is this code unit one of several but not the first one (a trail surrogate)?
1043 * Same as UTF16_IS_TRAIL.
1044 * @deprecated ICU 2.4. Renamed to U_IS_TRAIL and U16_IS_TRAIL, see utf_old.h.
1045 */
1046#define UTF_IS_TRAIL(uchar) U16_IS_TRAIL(uchar)
1047
1048/**
1049 * Does this code point require multiple code units (is it a supplementary code point)?
1050 * Same as UTF16_NEED_MULTIPLE_UCHAR.
1051 * @deprecated ICU 2.4. Use U16_LENGTH or test ((uint32_t)(c)>0xffff) instead.
1052 */
1053#define UTF_NEED_MULTIPLE_UCHAR(c) UTF16_NEED_MULTIPLE_UCHAR(c)
1054
1055/**
1056 * How many code units are used to encode this code point (1 or 2)?
1057 * Same as UTF16_CHAR_LENGTH.
1058 * @deprecated ICU 2.4. Renamed to U16_LENGTH, see utf_old.h.
1059 */
1060#define UTF_CHAR_LENGTH(c) U16_LENGTH(c)
1061
1062/**
1063 * How many code units are used at most for any Unicode code point (2)?
1064 * Same as UTF16_MAX_CHAR_LENGTH.
1065 * @deprecated ICU 2.4. Renamed to U16_MAX_LENGTH, see utf_old.h.
1066 */
1067#define UTF_MAX_CHAR_LENGTH U16_MAX_LENGTH
1068
1069/**
1070 * Set c to the code point that contains the code unit i.
1071 * i could point to the lead or the trail surrogate for the code point.
1072 * i is not modified.
1073 * Same as UTF16_GET_CHAR.
1074 * \pre 0<=i<length
1075 *
1076 * @deprecated ICU 2.4. Renamed to U16_GET, see utf_old.h.
1077 */
1078#define UTF_GET_CHAR(s, start, i, length, c) U16_GET(s, start, i, length, c)
1079
1080/**
1081 * Set c to the code point that starts at code unit i
1082 * and advance i to beyond the code units of this code point (post-increment).
1083 * i must point to the first code unit of a code point.
1084 * Otherwise c is set to the trail unit (surrogate) itself.
1085 * Same as UTF16_NEXT_CHAR.
1086 * \pre 0<=i<length
1087 * \post 0<i<=length
1088 *
1089 * @deprecated ICU 2.4. Renamed to U16_NEXT, see utf_old.h.
1090 */
1091#define UTF_NEXT_CHAR(s, i, length, c) U16_NEXT(s, i, length, c)
1092
1093/**
1094 * Append the code units of code point c to the string at index i
1095 * and advance i to beyond the new code units (post-increment).
1096 * The code units beginning at index i will be overwritten.
1097 * Same as UTF16_APPEND_CHAR.
1098 * \pre 0<=c<=0x10ffff
1099 * \pre 0<=i<length
1100 * \post 0<i<=length
1101 *
1102 * @deprecated ICU 2.4. Use U16_APPEND instead, see utf_old.h.
1103 */
1104#define UTF_APPEND_CHAR(s, i, length, c) UTF16_APPEND_CHAR_SAFE(s, i, length, c)
1105
1106/**
1107 * Advance i to beyond the code units of the code point that begins at i.
1108 * I.e., advance i by one code point.
1109 * Same as UTF16_FWD_1.
1110 * \pre 0<=i<length
1111 * \post 0<i<=length
1112 *
1113 * @deprecated ICU 2.4. Renamed to U16_FWD_1, see utf_old.h.
1114 */
1115#define UTF_FWD_1(s, i, length) U16_FWD_1(s, i, length)
1116
1117/**
1118 * Advance i to beyond the code units of the n code points where the first one begins at i.
1119 * I.e., advance i by n code points.
1120 * Same as UT16_FWD_N.
1121 * \pre 0<=i<length
1122 * \post 0<i<=length
1123 *
1124 * @deprecated ICU 2.4. Renamed to U16_FWD_N, see utf_old.h.
1125 */
1126#define UTF_FWD_N(s, i, length, n) U16_FWD_N(s, i, length, n)
1127
1128/**
1129 * Take the random-access index i and adjust it so that it points to the beginning
1130 * of a code point.
1131 * The input index points to any code unit of a code point and is moved to point to
1132 * the first code unit of the same code point. i is never incremented.
1133 * In other words, if i points to a trail surrogate that is preceded by a matching
1134 * lead surrogate, then i is decremented. Otherwise it is not modified.
1135 * This can be used to start an iteration with UTF_NEXT_CHAR() from a random index.
1136 * Same as UTF16_SET_CHAR_START.
1137 * \pre start<=i<length
1138 * \post start<=i<length
1139 *
1140 * @deprecated ICU 2.4. Renamed to U16_SET_CP_START, see utf_old.h.
1141 */
1142#define UTF_SET_CHAR_START(s, start, i) U16_SET_CP_START(s, start, i)
1143
1144/**
1145 * Set c to the code point that has code units before i
1146 * and move i backward (towards the beginning of the string)
1147 * to the first code unit of this code point (pre-increment).
1148 * i must point to the first code unit after the last unit of a code point (i==length is allowed).
1149 * Same as UTF16_PREV_CHAR.
1150 * \pre start<i<=length
1151 * \post start<=i<length
1152 *
1153 * @deprecated ICU 2.4. Renamed to U16_PREV, see utf_old.h.
1154 */
1155#define UTF_PREV_CHAR(s, start, i, c) U16_PREV(s, start, i, c)
1156
1157/**
1158 * Move i backward (towards the beginning of the string)
1159 * to the first code unit of the code point that has code units before i.
1160 * I.e., move i backward by one code point.
1161 * i must point to the first code unit after the last unit of a code point (i==length is allowed).
1162 * Same as UTF16_BACK_1.
1163 * \pre start<i<=length
1164 * \post start<=i<length
1165 *
1166 * @deprecated ICU 2.4. Renamed to U16_BACK_1, see utf_old.h.
1167 */
1168#define UTF_BACK_1(s, start, i) U16_BACK_1(s, start, i)
1169
1170/**
1171 * Move i backward (towards the beginning of the string)
1172 * to the first code unit of the n code points that have code units before i.
1173 * I.e., move i backward by n code points.
1174 * i must point to the first code unit after the last unit of a code point (i==length is allowed).
1175 * Same as UTF16_BACK_N.
1176 * \pre start<i<=length
1177 * \post start<=i<length
1178 *
1179 * @deprecated ICU 2.4. Renamed to U16_BACK_N, see utf_old.h.
1180 */
1181#define UTF_BACK_N(s, start, i, n) U16_BACK_N(s, start, i, n)
1182
1183/**
1184 * Take the random-access index i and adjust it so that it points beyond
1185 * a code point. The input index points beyond any code unit
1186 * of a code point and is moved to point beyond the last code unit of the same
1187 * code point. i is never decremented.
1188 * In other words, if i points to a trail surrogate that is preceded by a matching
1189 * lead surrogate, then i is incremented. Otherwise it is not modified.
1190 * This can be used to start an iteration with UTF_PREV_CHAR() from a random index.
1191 * Same as UTF16_SET_CHAR_LIMIT.
1192 * \pre start<i<=length
1193 * \post start<i<=length
1194 *
1195 * @deprecated ICU 2.4. Renamed to U16_SET_CP_LIMIT, see utf_old.h.
1196 */
1197#define UTF_SET_CHAR_LIMIT(s, start, i, length) U16_SET_CP_LIMIT(s, start, i, length)
1198
1199#endif // !U_HIDE_DEPRECATED_API && !U_HIDE_OBSOLETE_UTF_OLD_H
1200
1201#endif
1202