1 | /* |
2 | * jpegint.h |
3 | * |
4 | * Copyright (C) 1991-1997, Thomas G. Lane. |
5 | * Modified 1997-2011 by Guido Vollbeding. |
6 | * This file is part of the Independent JPEG Group's software. |
7 | * For conditions of distribution and use, see the accompanying README file. |
8 | * |
9 | * This file provides common declarations for the various JPEG modules. |
10 | * These declarations are considered internal to the JPEG library; most |
11 | * applications using the library shouldn't need to include this file. |
12 | */ |
13 | |
14 | |
15 | /* Declarations for both compression & decompression */ |
16 | |
17 | typedef enum { /* Operating modes for buffer controllers */ |
18 | JBUF_PASS_THRU, /* Plain stripwise operation */ |
19 | /* Remaining modes require a full-image buffer to have been created */ |
20 | JBUF_SAVE_SOURCE, /* Run source subobject only, save output */ |
21 | JBUF_CRANK_DEST, /* Run dest subobject only, using saved data */ |
22 | JBUF_SAVE_AND_PASS /* Run both subobjects, save output */ |
23 | } J_BUF_MODE; |
24 | |
25 | /* Values of global_state field (jdapi.c has some dependencies on ordering!) */ |
26 | #define CSTATE_START 100 /* after create_compress */ |
27 | #define CSTATE_SCANNING 101 /* start_compress done, write_scanlines OK */ |
28 | #define CSTATE_RAW_OK 102 /* start_compress done, write_raw_data OK */ |
29 | #define CSTATE_WRCOEFS 103 /* jpeg_write_coefficients done */ |
30 | #define DSTATE_START 200 /* after create_decompress */ |
31 | #define 201 /* reading header markers, no SOS yet */ |
32 | #define DSTATE_READY 202 /* found SOS, ready for start_decompress */ |
33 | #define DSTATE_PRELOAD 203 /* reading multiscan file in start_decompress*/ |
34 | #define DSTATE_PRESCAN 204 /* performing dummy pass for 2-pass quant */ |
35 | #define DSTATE_SCANNING 205 /* start_decompress done, read_scanlines OK */ |
36 | #define DSTATE_RAW_OK 206 /* start_decompress done, read_raw_data OK */ |
37 | #define DSTATE_BUFIMAGE 207 /* expecting jpeg_start_output */ |
38 | #define DSTATE_BUFPOST 208 /* looking for SOS/EOI in jpeg_finish_output */ |
39 | #define DSTATE_RDCOEFS 209 /* reading file in jpeg_read_coefficients */ |
40 | #define DSTATE_STOPPING 210 /* looking for EOI in jpeg_finish_decompress */ |
41 | |
42 | |
43 | /* Declarations for compression modules */ |
44 | |
45 | /* Master control module */ |
46 | struct jpeg_comp_master { |
47 | JMETHOD(void, prepare_for_pass, (j_compress_ptr cinfo)); |
48 | JMETHOD(void, pass_startup, (j_compress_ptr cinfo)); |
49 | JMETHOD(void, finish_pass, (j_compress_ptr cinfo)); |
50 | |
51 | /* State variables made visible to other modules */ |
52 | boolean call_pass_startup; /* True if pass_startup must be called */ |
53 | boolean is_last_pass; /* True during last pass */ |
54 | }; |
55 | |
56 | /* Main buffer control (downsampled-data buffer) */ |
57 | struct jpeg_c_main_controller { |
58 | JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode)); |
59 | JMETHOD(void, process_data, (j_compress_ptr cinfo, |
60 | JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, |
61 | JDIMENSION in_rows_avail)); |
62 | }; |
63 | |
64 | /* Compression preprocessing (downsampling input buffer control) */ |
65 | struct jpeg_c_prep_controller { |
66 | JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode)); |
67 | JMETHOD(void, pre_process_data, (j_compress_ptr cinfo, |
68 | JSAMPARRAY input_buf, |
69 | JDIMENSION *in_row_ctr, |
70 | JDIMENSION in_rows_avail, |
71 | JSAMPIMAGE output_buf, |
72 | JDIMENSION *out_row_group_ctr, |
73 | JDIMENSION out_row_groups_avail)); |
74 | }; |
75 | |
76 | /* Coefficient buffer control */ |
77 | struct jpeg_c_coef_controller { |
78 | JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode)); |
79 | JMETHOD(boolean, compress_data, (j_compress_ptr cinfo, |
80 | JSAMPIMAGE input_buf)); |
81 | }; |
82 | |
83 | /* Colorspace conversion */ |
84 | struct jpeg_color_converter { |
85 | JMETHOD(void, start_pass, (j_compress_ptr cinfo)); |
86 | JMETHOD(void, color_convert, (j_compress_ptr cinfo, |
87 | JSAMPARRAY input_buf, JSAMPIMAGE output_buf, |
88 | JDIMENSION output_row, int num_rows)); |
89 | }; |
90 | |
91 | /* Downsampling */ |
92 | struct jpeg_downsampler { |
93 | JMETHOD(void, start_pass, (j_compress_ptr cinfo)); |
94 | JMETHOD(void, downsample, (j_compress_ptr cinfo, |
95 | JSAMPIMAGE input_buf, JDIMENSION in_row_index, |
96 | JSAMPIMAGE output_buf, |
97 | JDIMENSION out_row_group_index)); |
98 | |
99 | boolean need_context_rows; /* TRUE if need rows above & below */ |
100 | }; |
101 | |
102 | /* Forward DCT (also controls coefficient quantization) */ |
103 | typedef JMETHOD(void, forward_DCT_ptr, |
104 | (j_compress_ptr cinfo, jpeg_component_info * compptr, |
105 | JSAMPARRAY sample_data, JBLOCKROW coef_blocks, |
106 | JDIMENSION start_row, JDIMENSION start_col, |
107 | JDIMENSION num_blocks)); |
108 | |
109 | struct jpeg_forward_dct { |
110 | JMETHOD(void, start_pass, (j_compress_ptr cinfo)); |
111 | /* It is useful to allow each component to have a separate FDCT method. */ |
112 | forward_DCT_ptr forward_DCT[MAX_COMPONENTS]; |
113 | }; |
114 | |
115 | /* Entropy encoding */ |
116 | struct jpeg_entropy_encoder { |
117 | JMETHOD(void, start_pass, (j_compress_ptr cinfo, boolean gather_statistics)); |
118 | JMETHOD(boolean, encode_mcu, (j_compress_ptr cinfo, JBLOCKROW *MCU_data)); |
119 | JMETHOD(void, finish_pass, (j_compress_ptr cinfo)); |
120 | }; |
121 | |
122 | /* Marker writing */ |
123 | struct jpeg_marker_writer { |
124 | JMETHOD(void, , (j_compress_ptr cinfo)); |
125 | JMETHOD(void, , (j_compress_ptr cinfo)); |
126 | JMETHOD(void, , (j_compress_ptr cinfo)); |
127 | JMETHOD(void, write_file_trailer, (j_compress_ptr cinfo)); |
128 | JMETHOD(void, write_tables_only, (j_compress_ptr cinfo)); |
129 | /* These routines are exported to allow insertion of extra markers */ |
130 | /* Probably only COM and APPn markers should be written this way */ |
131 | JMETHOD(void, , (j_compress_ptr cinfo, int marker, |
132 | unsigned int datalen)); |
133 | JMETHOD(void, write_marker_byte, (j_compress_ptr cinfo, int val)); |
134 | }; |
135 | |
136 | |
137 | /* Declarations for decompression modules */ |
138 | |
139 | /* Master control module */ |
140 | struct jpeg_decomp_master { |
141 | JMETHOD(void, prepare_for_output_pass, (j_decompress_ptr cinfo)); |
142 | JMETHOD(void, finish_output_pass, (j_decompress_ptr cinfo)); |
143 | |
144 | /* State variables made visible to other modules */ |
145 | boolean is_dummy_pass; /* True during 1st pass for 2-pass quant */ |
146 | }; |
147 | |
148 | /* Input control module */ |
149 | struct jpeg_input_controller { |
150 | JMETHOD(int, consume_input, (j_decompress_ptr cinfo)); |
151 | JMETHOD(void, reset_input_controller, (j_decompress_ptr cinfo)); |
152 | JMETHOD(void, start_input_pass, (j_decompress_ptr cinfo)); |
153 | JMETHOD(void, finish_input_pass, (j_decompress_ptr cinfo)); |
154 | |
155 | /* State variables made visible to other modules */ |
156 | boolean has_multiple_scans; /* True if file has multiple scans */ |
157 | boolean eoi_reached; /* True when EOI has been consumed */ |
158 | }; |
159 | |
160 | /* Main buffer control (downsampled-data buffer) */ |
161 | struct jpeg_d_main_controller { |
162 | JMETHOD(void, start_pass, (j_decompress_ptr cinfo, J_BUF_MODE pass_mode)); |
163 | JMETHOD(void, process_data, (j_decompress_ptr cinfo, |
164 | JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, |
165 | JDIMENSION out_rows_avail)); |
166 | }; |
167 | |
168 | /* Coefficient buffer control */ |
169 | struct jpeg_d_coef_controller { |
170 | JMETHOD(void, start_input_pass, (j_decompress_ptr cinfo)); |
171 | JMETHOD(int, consume_data, (j_decompress_ptr cinfo)); |
172 | JMETHOD(void, start_output_pass, (j_decompress_ptr cinfo)); |
173 | JMETHOD(int, decompress_data, (j_decompress_ptr cinfo, |
174 | JSAMPIMAGE output_buf)); |
175 | /* Pointer to array of coefficient virtual arrays, or NULL if none */ |
176 | jvirt_barray_ptr *coef_arrays; |
177 | }; |
178 | |
179 | /* Decompression postprocessing (color quantization buffer control) */ |
180 | struct jpeg_d_post_controller { |
181 | JMETHOD(void, start_pass, (j_decompress_ptr cinfo, J_BUF_MODE pass_mode)); |
182 | JMETHOD(void, post_process_data, (j_decompress_ptr cinfo, |
183 | JSAMPIMAGE input_buf, |
184 | JDIMENSION *in_row_group_ctr, |
185 | JDIMENSION in_row_groups_avail, |
186 | JSAMPARRAY output_buf, |
187 | JDIMENSION *out_row_ctr, |
188 | JDIMENSION out_rows_avail)); |
189 | }; |
190 | |
191 | /* Marker reading & parsing */ |
192 | struct jpeg_marker_reader { |
193 | JMETHOD(void, reset_marker_reader, (j_decompress_ptr cinfo)); |
194 | /* Read markers until SOS or EOI. |
195 | * Returns same codes as are defined for jpeg_consume_input: |
196 | * JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI. |
197 | */ |
198 | JMETHOD(int, read_markers, (j_decompress_ptr cinfo)); |
199 | /* Read a restart marker --- exported for use by entropy decoder only */ |
200 | jpeg_marker_parser_method read_restart_marker; |
201 | |
202 | /* State of marker reader --- nominally internal, but applications |
203 | * supplying COM or APPn handlers might like to know the state. |
204 | */ |
205 | boolean saw_SOI; /* found SOI? */ |
206 | boolean saw_SOF; /* found SOF? */ |
207 | int next_restart_num; /* next restart number expected (0-7) */ |
208 | unsigned int discarded_bytes; /* # of bytes skipped looking for a marker */ |
209 | }; |
210 | |
211 | /* Entropy decoding */ |
212 | struct jpeg_entropy_decoder { |
213 | JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); |
214 | JMETHOD(boolean, decode_mcu, (j_decompress_ptr cinfo, |
215 | JBLOCKROW *MCU_data)); |
216 | }; |
217 | |
218 | /* Inverse DCT (also performs dequantization) */ |
219 | typedef JMETHOD(void, inverse_DCT_method_ptr, |
220 | (j_decompress_ptr cinfo, jpeg_component_info * compptr, |
221 | JCOEFPTR coef_block, |
222 | JSAMPARRAY output_buf, JDIMENSION output_col)); |
223 | |
224 | struct jpeg_inverse_dct { |
225 | JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); |
226 | /* It is useful to allow each component to have a separate IDCT method. */ |
227 | inverse_DCT_method_ptr inverse_DCT[MAX_COMPONENTS]; |
228 | }; |
229 | |
230 | /* Upsampling (note that upsampler must also call color converter) */ |
231 | struct jpeg_upsampler { |
232 | JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); |
233 | JMETHOD(void, upsample, (j_decompress_ptr cinfo, |
234 | JSAMPIMAGE input_buf, |
235 | JDIMENSION *in_row_group_ctr, |
236 | JDIMENSION in_row_groups_avail, |
237 | JSAMPARRAY output_buf, |
238 | JDIMENSION *out_row_ctr, |
239 | JDIMENSION out_rows_avail)); |
240 | |
241 | boolean need_context_rows; /* TRUE if need rows above & below */ |
242 | }; |
243 | |
244 | /* Colorspace conversion */ |
245 | struct jpeg_color_deconverter { |
246 | JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); |
247 | JMETHOD(void, color_convert, (j_decompress_ptr cinfo, |
248 | JSAMPIMAGE input_buf, JDIMENSION input_row, |
249 | JSAMPARRAY output_buf, int num_rows)); |
250 | }; |
251 | |
252 | /* Color quantization or color precision reduction */ |
253 | struct jpeg_color_quantizer { |
254 | JMETHOD(void, start_pass, (j_decompress_ptr cinfo, boolean is_pre_scan)); |
255 | JMETHOD(void, color_quantize, (j_decompress_ptr cinfo, |
256 | JSAMPARRAY input_buf, JSAMPARRAY output_buf, |
257 | int num_rows)); |
258 | JMETHOD(void, finish_pass, (j_decompress_ptr cinfo)); |
259 | JMETHOD(void, new_color_map, (j_decompress_ptr cinfo)); |
260 | }; |
261 | |
262 | |
263 | /* Miscellaneous useful macros */ |
264 | |
265 | #undef MAX |
266 | #define MAX(a,b) ((a) > (b) ? (a) : (b)) |
267 | #undef MIN |
268 | #define MIN(a,b) ((a) < (b) ? (a) : (b)) |
269 | |
270 | |
271 | /* We assume that right shift corresponds to signed division by 2 with |
272 | * rounding towards minus infinity. This is correct for typical "arithmetic |
273 | * shift" instructions that shift in copies of the sign bit. But some |
274 | * C compilers implement >> with an unsigned shift. For these machines you |
275 | * must define RIGHT_SHIFT_IS_UNSIGNED. |
276 | * RIGHT_SHIFT provides a proper signed right shift of an INT32 quantity. |
277 | * It is only applied with constant shift counts. SHIFT_TEMPS must be |
278 | * included in the variables of any routine using RIGHT_SHIFT. |
279 | */ |
280 | |
281 | #ifdef RIGHT_SHIFT_IS_UNSIGNED |
282 | #define SHIFT_TEMPS INT32 shift_temp; |
283 | #define RIGHT_SHIFT(x,shft) \ |
284 | ((shift_temp = (x)) < 0 ? \ |
285 | (shift_temp >> (shft)) | ((~((INT32) 0)) << (32-(shft))) : \ |
286 | (shift_temp >> (shft))) |
287 | #else |
288 | #define SHIFT_TEMPS |
289 | #define RIGHT_SHIFT(x,shft) ((x) >> (shft)) |
290 | #endif |
291 | |
292 | |
293 | /* Short forms of external names for systems with brain-damaged linkers. */ |
294 | |
295 | #ifdef NEED_SHORT_EXTERNAL_NAMES |
296 | #define jinit_compress_master jICompress |
297 | #define jinit_c_master_control jICMaster |
298 | #define jinit_c_main_controller jICMainC |
299 | #define jinit_c_prep_controller jICPrepC |
300 | #define jinit_c_coef_controller jICCoefC |
301 | #define jinit_color_converter jICColor |
302 | #define jinit_downsampler jIDownsampler |
303 | #define jinit_forward_dct jIFDCT |
304 | #define jinit_huff_encoder jIHEncoder |
305 | #define jinit_arith_encoder jIAEncoder |
306 | #define jinit_marker_writer jIMWriter |
307 | #define jinit_master_decompress jIDMaster |
308 | #define jinit_d_main_controller jIDMainC |
309 | #define jinit_d_coef_controller jIDCoefC |
310 | #define jinit_d_post_controller jIDPostC |
311 | #define jinit_input_controller jIInCtlr |
312 | #define jinit_marker_reader jIMReader |
313 | #define jinit_huff_decoder jIHDecoder |
314 | #define jinit_arith_decoder jIADecoder |
315 | #define jinit_inverse_dct jIIDCT |
316 | #define jinit_upsampler jIUpsampler |
317 | #define jinit_color_deconverter jIDColor |
318 | #define jinit_1pass_quantizer jI1Quant |
319 | #define jinit_2pass_quantizer jI2Quant |
320 | #define jinit_merged_upsampler jIMUpsampler |
321 | #define jinit_memory_mgr jIMemMgr |
322 | #define jdiv_round_up jDivRound |
323 | #define jround_up jRound |
324 | #define jzero_far jZeroFar |
325 | #define jcopy_sample_rows jCopySamples |
326 | #define jcopy_block_row jCopyBlocks |
327 | #define jpeg_zigzag_order jZIGTable |
328 | #define jpeg_natural_order jZAGTable |
329 | #define jpeg_natural_order7 jZAG7Table |
330 | #define jpeg_natural_order6 jZAG6Table |
331 | #define jpeg_natural_order5 jZAG5Table |
332 | #define jpeg_natural_order4 jZAG4Table |
333 | #define jpeg_natural_order3 jZAG3Table |
334 | #define jpeg_natural_order2 jZAG2Table |
335 | #define jpeg_aritab jAriTab |
336 | #endif /* NEED_SHORT_EXTERNAL_NAMES */ |
337 | |
338 | |
339 | /* On normal machines we can apply MEMCOPY() and MEMZERO() to sample arrays |
340 | * and coefficient-block arrays. This won't work on 80x86 because the arrays |
341 | * are FAR and we're assuming a small-pointer memory model. However, some |
342 | * DOS compilers provide far-pointer versions of memcpy() and memset() even |
343 | * in the small-model libraries. These will be used if USE_FMEM is defined. |
344 | * Otherwise, the routines in jutils.c do it the hard way. |
345 | */ |
346 | |
347 | #ifndef NEED_FAR_POINTERS /* normal case, same as regular macro */ |
348 | #define FMEMZERO(target,size) MEMZERO(target,size) |
349 | #else /* 80x86 case */ |
350 | #ifdef USE_FMEM |
351 | #define FMEMZERO(target,size) _fmemset((void FAR *)(target), 0, (size_t)(size)) |
352 | #else |
353 | EXTERN(void) jzero_far JPP((void FAR * target, size_t bytestozero)); |
354 | #define FMEMZERO(target,size) jzero_far(target, size) |
355 | #endif |
356 | #endif |
357 | |
358 | |
359 | /* Compression module initialization routines */ |
360 | EXTERN(void) jinit_compress_master JPP((j_compress_ptr cinfo)); |
361 | EXTERN(void) jinit_c_master_control JPP((j_compress_ptr cinfo, |
362 | boolean transcode_only)); |
363 | EXTERN(void) jinit_c_main_controller JPP((j_compress_ptr cinfo, |
364 | boolean need_full_buffer)); |
365 | EXTERN(void) jinit_c_prep_controller JPP((j_compress_ptr cinfo, |
366 | boolean need_full_buffer)); |
367 | EXTERN(void) jinit_c_coef_controller JPP((j_compress_ptr cinfo, |
368 | boolean need_full_buffer)); |
369 | EXTERN(void) jinit_color_converter JPP((j_compress_ptr cinfo)); |
370 | EXTERN(void) jinit_downsampler JPP((j_compress_ptr cinfo)); |
371 | EXTERN(void) jinit_forward_dct JPP((j_compress_ptr cinfo)); |
372 | EXTERN(void) jinit_huff_encoder JPP((j_compress_ptr cinfo)); |
373 | EXTERN(void) jinit_arith_encoder JPP((j_compress_ptr cinfo)); |
374 | EXTERN(void) jinit_marker_writer JPP((j_compress_ptr cinfo)); |
375 | /* Decompression module initialization routines */ |
376 | EXTERN(void) jinit_master_decompress JPP((j_decompress_ptr cinfo)); |
377 | EXTERN(void) jinit_d_main_controller JPP((j_decompress_ptr cinfo, |
378 | boolean need_full_buffer)); |
379 | EXTERN(void) jinit_d_coef_controller JPP((j_decompress_ptr cinfo, |
380 | boolean need_full_buffer)); |
381 | EXTERN(void) jinit_d_post_controller JPP((j_decompress_ptr cinfo, |
382 | boolean need_full_buffer)); |
383 | EXTERN(void) jinit_input_controller JPP((j_decompress_ptr cinfo)); |
384 | EXTERN(void) jinit_marker_reader JPP((j_decompress_ptr cinfo)); |
385 | EXTERN(void) jinit_huff_decoder JPP((j_decompress_ptr cinfo)); |
386 | EXTERN(void) jinit_arith_decoder JPP((j_decompress_ptr cinfo)); |
387 | EXTERN(void) jinit_inverse_dct JPP((j_decompress_ptr cinfo)); |
388 | EXTERN(void) jinit_upsampler JPP((j_decompress_ptr cinfo)); |
389 | EXTERN(void) jinit_color_deconverter JPP((j_decompress_ptr cinfo)); |
390 | EXTERN(void) jinit_1pass_quantizer JPP((j_decompress_ptr cinfo)); |
391 | EXTERN(void) jinit_2pass_quantizer JPP((j_decompress_ptr cinfo)); |
392 | EXTERN(void) jinit_merged_upsampler JPP((j_decompress_ptr cinfo)); |
393 | /* Memory manager initialization */ |
394 | EXTERN(void) jinit_memory_mgr JPP((j_common_ptr cinfo)); |
395 | |
396 | /* Utility routines in jutils.c */ |
397 | EXTERN(long) jdiv_round_up JPP((long a, long b)); |
398 | EXTERN(long) jround_up JPP((long a, long b)); |
399 | EXTERN(void) jcopy_sample_rows JPP((JSAMPARRAY input_array, int source_row, |
400 | JSAMPARRAY output_array, int dest_row, |
401 | int num_rows, JDIMENSION num_cols)); |
402 | EXTERN(void) jcopy_block_row JPP((JBLOCKROW input_row, JBLOCKROW output_row, |
403 | JDIMENSION num_blocks)); |
404 | /* Constant tables in jutils.c */ |
405 | #if 0 /* This table is not actually needed in v6a */ |
406 | extern const int jpeg_zigzag_order[]; /* natural coef order to zigzag order */ |
407 | #endif |
408 | extern const int jpeg_natural_order[]; /* zigzag coef order to natural order */ |
409 | extern const int jpeg_natural_order7[]; /* zz to natural order for 7x7 block */ |
410 | extern const int jpeg_natural_order6[]; /* zz to natural order for 6x6 block */ |
411 | extern const int jpeg_natural_order5[]; /* zz to natural order for 5x5 block */ |
412 | extern const int jpeg_natural_order4[]; /* zz to natural order for 4x4 block */ |
413 | extern const int jpeg_natural_order3[]; /* zz to natural order for 3x3 block */ |
414 | extern const int jpeg_natural_order2[]; /* zz to natural order for 2x2 block */ |
415 | |
416 | /* Arithmetic coding probability estimation tables in jaricom.c */ |
417 | extern const INT32 jpeg_aritab[]; |
418 | |
419 | /* Suppress undefined-structure complaints if necessary. */ |
420 | |
421 | #ifdef INCOMPLETE_TYPES_BROKEN |
422 | #ifndef AM_MEMORY_MANAGER /* only jmemmgr.c defines these */ |
423 | struct jvirt_sarray_control { long dummy; }; |
424 | struct jvirt_barray_control { long dummy; }; |
425 | #endif |
426 | #endif /* INCOMPLETE_TYPES_BROKEN */ |
427 | |