1/*
2 * jdcolext.c
3 *
4 * This file was part of the Independent JPEG Group's software:
5 * Copyright (C) 1991-1997, Thomas G. Lane.
6 * libjpeg-turbo Modifications:
7 * Copyright (C) 2009, 2011, 2015, D. R. Commander.
8 * For conditions of distribution and use, see the accompanying README.ijg
9 * file.
10 *
11 * This file contains output colorspace conversion routines.
12 */
13
14
15/* This file is included by jdcolor.c */
16
17
18/*
19 * Convert some rows of samples to the output colorspace.
20 *
21 * Note that we change from noninterleaved, one-plane-per-component format
22 * to interleaved-pixel format. The output buffer is therefore three times
23 * as wide as the input buffer.
24 * A starting row offset is provided only for the input buffer. The caller
25 * can easily adjust the passed output_buf value to accommodate any row
26 * offset required on that side.
27 */
28
29INLINE
30LOCAL(void)
31ycc_rgb_convert_internal (j_decompress_ptr cinfo,
32 JSAMPIMAGE input_buf, JDIMENSION input_row,
33 JSAMPARRAY output_buf, int num_rows)
34{
35 my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
36 register int y, cb, cr;
37 register JSAMPROW outptr;
38 register JSAMPROW inptr0, inptr1, inptr2;
39 register JDIMENSION col;
40 JDIMENSION num_cols = cinfo->output_width;
41 /* copy these pointers into registers if possible */
42 register JSAMPLE * range_limit = cinfo->sample_range_limit;
43 register int * Crrtab = cconvert->Cr_r_tab;
44 register int * Cbbtab = cconvert->Cb_b_tab;
45 register JLONG * Crgtab = cconvert->Cr_g_tab;
46 register JLONG * Cbgtab = cconvert->Cb_g_tab;
47 SHIFT_TEMPS
48
49 while (--num_rows >= 0) {
50 inptr0 = input_buf[0][input_row];
51 inptr1 = input_buf[1][input_row];
52 inptr2 = input_buf[2][input_row];
53 input_row++;
54 outptr = *output_buf++;
55 for (col = 0; col < num_cols; col++) {
56 y = GETJSAMPLE(inptr0[col]);
57 cb = GETJSAMPLE(inptr1[col]);
58 cr = GETJSAMPLE(inptr2[col]);
59 /* Range-limiting is essential due to noise introduced by DCT losses. */
60 outptr[RGB_RED] = range_limit[y + Crrtab[cr]];
61 outptr[RGB_GREEN] = range_limit[y +
62 ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr],
63 SCALEBITS))];
64 outptr[RGB_BLUE] = range_limit[y + Cbbtab[cb]];
65 /* Set unused byte to 0xFF so it can be interpreted as an opaque */
66 /* alpha channel value */
67#ifdef RGB_ALPHA
68 outptr[RGB_ALPHA] = 0xFF;
69#endif
70 outptr += RGB_PIXELSIZE;
71 }
72 }
73}
74
75
76/*
77 * Convert grayscale to RGB: just duplicate the graylevel three times.
78 * This is provided to support applications that don't want to cope
79 * with grayscale as a separate case.
80 */
81
82INLINE
83LOCAL(void)
84gray_rgb_convert_internal (j_decompress_ptr cinfo,
85 JSAMPIMAGE input_buf, JDIMENSION input_row,
86 JSAMPARRAY output_buf, int num_rows)
87{
88 register JSAMPROW inptr, outptr;
89 register JDIMENSION col;
90 JDIMENSION num_cols = cinfo->output_width;
91
92 while (--num_rows >= 0) {
93 inptr = input_buf[0][input_row++];
94 outptr = *output_buf++;
95 for (col = 0; col < num_cols; col++) {
96 /* We can dispense with GETJSAMPLE() here */
97 outptr[RGB_RED] = outptr[RGB_GREEN] = outptr[RGB_BLUE] = inptr[col];
98 /* Set unused byte to 0xFF so it can be interpreted as an opaque */
99 /* alpha channel value */
100#ifdef RGB_ALPHA
101 outptr[RGB_ALPHA] = 0xFF;
102#endif
103 outptr += RGB_PIXELSIZE;
104 }
105 }
106}
107
108
109/*
110 * Convert RGB to extended RGB: just swap the order of source pixels
111 */
112
113INLINE
114LOCAL(void)
115rgb_rgb_convert_internal (j_decompress_ptr cinfo,
116 JSAMPIMAGE input_buf, JDIMENSION input_row,
117 JSAMPARRAY output_buf, int num_rows)
118{
119 register JSAMPROW inptr0, inptr1, inptr2;
120 register JSAMPROW outptr;
121 register JDIMENSION col;
122 JDIMENSION num_cols = cinfo->output_width;
123
124 while (--num_rows >= 0) {
125 inptr0 = input_buf[0][input_row];
126 inptr1 = input_buf[1][input_row];
127 inptr2 = input_buf[2][input_row];
128 input_row++;
129 outptr = *output_buf++;
130 for (col = 0; col < num_cols; col++) {
131 /* We can dispense with GETJSAMPLE() here */
132 outptr[RGB_RED] = inptr0[col];
133 outptr[RGB_GREEN] = inptr1[col];
134 outptr[RGB_BLUE] = inptr2[col];
135 /* Set unused byte to 0xFF so it can be interpreted as an opaque */
136 /* alpha channel value */
137#ifdef RGB_ALPHA
138 outptr[RGB_ALPHA] = 0xFF;
139#endif
140 outptr += RGB_PIXELSIZE;
141 }
142 }
143}
144